Examples of using Correction value in English and their translations into French
{-}
-
Official
-
Colloquial
Read correction value from diagram.
Set here the gamma correction value.
Cv correction value for background noise.
The first shot is carried out without correction value.
Cv correction value for background sound.
Press the sensor button for the desired exposure correction value.
Additional correction value(near vision.
Press the 8 or 9 button to adjust the time correction value.
The correction value can be checked by.
Press the ENT button to store the time correction value.
The correction value of the offset may be transmitted.
We recommend determining the correction value again every 3-4 weeks.
The correction value can be checked using.
A stable value with a difference of±2 can give a correction value.
The correction value can be checked using STATUS.
The current phase shift is dependent on the current phase shift correction value and a previous phase shift.
The correction value is equal to the negative of the bias.
This module calculates a correction value, which then rectifies the balance difference.
A correction value of +1% when the prism cover is folded up.
To adjust the time correction value for other speaker, repeat the steps 2 and 3.
A correction value of +2/3 EV or -2/3 EV is a good starting point.
Here we calculate the time correction value for the front left speaker in the diagram on the above.
The correction value can be checked using<STATUS>
The method according to claim 1, wherein the correction value is obtained by a correction of the proportional integral correction type.
No correction value is added for single vision reading lenses.
The device according to claim 3, wherein the correction value is obtained via a correction of the proportional integral correction type.
Said correction value is a multiple of the incremental value. .
The previous phase correction value δ p is thus initialized(step 39) to a certain value Aφ 0.
The correction value is accepted following the query to save and confirm with yes.
Rockwell correction value for testing cylindrical specimens.