Examples of using Diffusion layer in English and their translations into French
{-}
-
Colloquial
-
Official
The electrode 111 is covered by a gas diffusion layer 121.
Our Gas Diffusion Layer(GDL) Pack consists of the following GDL.
A layer 138 is moreover fixed to the gas diffusion layer 134.
The diffusion layer advantageously has a nanoporous structure.
Such a thickness gives the diffusion layer a low electrical resistance.
People also translate
The diffusion layer may include two electrically conducting principal faces.
The electrodes each include a diffusion layer and an active layer. .
A gas diffusion layer 22 is placed in contact with the cathode 112.
The first andsecond electrodes each comprise a diffusion layer and a catalyst.
The diffusion layer obtained is placed in an electrochemical deposition cell.
FIG. 6 shows platinum penetration profile in a porous carbon diffusion layer.
FIG. 6 represents a diffusion layer according to a particular embodiment.
After anneal, the nanostructures should then be transferred onto the gas diffusion layer.
According to another variant, the gas diffusion layer is formed from graphite fibers.
Each electrode 12 includes an active layer 14 and a gas diffusion layer 16.
The gas diffusion layer 122 is placed in contact with the uncovered part of the anode 112.
Thus, the contact resistance between a plate and a gas diffusion layer was reduced.
Second diffusion layer 35 is interposed between the cathode 30 and a distribution plate 50.
The deposits produced by DLI-MOCVD on an E-tek diffusion layer were viewed under the microscope.
The gas diffusion layer 325 is in contact with the metal sheet 41 of the bipolar plate 22.
Many carbonitride network precipitates are present in the diffusion layer.
Optimal formulations of active layers on diffusion layer support have been described.
A gas diffusion layer is covered with a hydrophobic layer made of polytetrafluoroethylene.
These reliefs are in contact with the gas diffusion layer 121 of the membrane electrode assembly 110.
The gas diffusion layer 121 is thus placed in contact with the uncovered part of the cathode 111.
FIGS. 6 and 7 illustrate the platinum penetration profiles in a porous carbon diffusion layer.
In particular, a diffusion layer may be placed between an electrode and a distribution plate.
FIG. 9 shows other embodiments of polymer layer 24 on diffusion layer 18.
NuVant's ELAT is a carbon cloth gas diffusion layer(GDL) with a carbon microporous layer. .
Gas diffusion layer interposed and compressed between the first membrane electrode assembly and the bipolar plate;