Examples of using Factor method in English and their translations into French
{-}
-
Official
-
Colloquial
They must now use the QST factor method.
If the factor method is used, the factor rate would be 4/104.
Short term, use the correction factor method see chapter.
The emission factor method is used since there is no monitoring data available.
The following are some aspects of the QST factor method.
The emission factor method is applicable to all processes and configurations which generate air releases.
Bell proposed to rely instead on a cost factor method.
From January 1, 2014, only theQST factor method(explained below) will be allowed to be used to determine ITRs.
It is based on the limit stat concept used in conjunction with a partial factor method.
From January 1, 2014, only the QST factor method(explained below) will be allowed to be used to determine ITRs.
It is based on the limit state concept used in conjunction with a partial factor method.
The QST factor method will have to take into account the following ITR restrictions applicable to large businesses.
The simplest method would be to use population size as the weighting factor method 1.
The equation for the emission factor method can have different forms, depending upon the units of emission factors. .
The air emission of phenol from the facility is estimated by the emission factor method as follows.
For departments who use the factor method rates for determining the amount of HST paid, these rates are currently being developed for Ontario and British Columbia.
This range is about two orders of magnitude less than the values obtained for a TDI/RfD using the safety factor method.
The logarithmic derivative idea is closely connected to the integrating factor method for first-order differential equations.
The Specifications for Highway Bridges established in 1972 has been significantly revised including the introduction of the partial factor method.
Screenshot of the HBM Perception Software, according to the IEC 60060-1(2010)standard with K factor method with curve fitting and filtering checked in accordance with IEC 61083-2.