Examples of using Multi-layer insulation in English and their translations into French
{-}
-
Official
-
Colloquial
Multi-layer insulation.
Low energy consumption due to multi-layer insulation.
Multi-layer insulation.
Low energy consumption due to multi-layer insulation.
Multi-Layer insulation Glass paper and aluminum foil.
For added protection,the walls of the subsurface habitat are composed of multi-layer insulation.
Multi-Layer insulation Glass paper and aluminum foil.
The thermal protections of satellites are made of multi-layer insulations(MLI.
Multi-layer insulation 6 is then wrapped around pipes 34.
Each isothermal zone is surrounded by multi-layer insulation 6 and possibly by a radiator.
Multi-layer insulation fabric can be provided in very cold area.
The largest impact is located on the infrared telescope Multi-Layer Insulation(MLI), with perforation of diameter of 4.5 mm.
Multi-layer insulation with robust lightweight refractory bricks in the furnace chamber.
Air baffles made of 1.4828(DIN) Multi-layer insulation with fiber plates provides for low outer temperatures.
This multi-layer insulation, includes a layer of foam polyethylene and aluminum foil.
The arm was entirely covered with a multi-layer insulation system consisting of alternate layers of goldized Kapton, Dacron scrim cloth, and a Beta cloth(fibre glass) outer covering.
Multi-layer insulation package, 100% wind-proof insulation shield without air currents.
The ultra-thin, multi-reflective and multi-layer insulation allows keeping the existing roof framework without changing the aspect of the building.
Multi-layer insulation consisting of lightweight refractory bricks backed by microporus silica insulation. .
High vacuum multi-layer insulation plan, the supply of not less than five years of vacuum quality assurance.
Multi-Layer Insulation, or MLI, is a thermal insulation consisting of multiple layers of thin sheets.
Payload Unit Multi-Layer Insulation(MLI), which is an octagonal structure 4.46 m in diameter and 1.40 m in height;
Multi-layer insulation 6 is then wrapped around each of these equipment items and on a portion of nozzles 32.
The very effective, multi-layer insulation with long-life lightweight refractory bricks inside the chamber guarantees low outside temperatures even if the furnace is in continuously used.
Multi-layer insulation, or MLI, is thermal insulation composed of multiple layers of thin sheets and is often used on spacecraft.
Some multi-layer insulation(MLI) may come off the IUS first-stage exit cone during operation.
Multi-layer insulation with fiber plates(not classified according to EU directive 67/548) provides for low outer temperatures.
In case of multi-layers insulation, the mats should be secured tightly at all lateral and longitudinal joints of each layer, and the joints of two layers should be staggered.
