Examples of using Old router in English and their translations into French
{-}
-
Colloquial
-
Official
Hack an old router to act as a repeater.
Disable the DHCP server on your old router.
Hack an old router to act as a repeater.
Check the documentation for your old router.
To use your old router as an access point.
People also translate
It works just as well as my old router.
Turn the old router into a Wi-Fi relay station.
How to Extend WiFi Network With an Old Router.
Turn the old router into a Wi-Fi relay station.
How to Boost Your Wi-Fi Network With an Old Router.
To use your old router as an access point: 1.
To reconfigure the wireless network on your old router.
How can I use my old router as an access point?
How can you Boost your WiFi Network along with an Old Router.
If your old router supports an Auto function, select that.
Do not connect the cable to the Internet port on your old router.
Ensure that your old router is connected to the internet.
Enter the 12-digit MAC address of your old router, then click OK.
To use your old router as an access point, do the following.
To reconfigure the wireless network on your old router, do the following.
Keep in mind that an old router will not be able to provide high speed.
In this way, the identity of the router was moved from an old router to a new one.
With your computer connected to your old router, log into its browserbased administration utility.
Otherwise, you may need to manually select the wireless operating channel on your old router.
With your computer connected to your old router, log into its browser-based.
Here's a lengthy tutorial that goes into detail on adding custom firmware to an old router.
Change the password(sometimes called the pre-shared key) on your old router to match the password on your new router. .
Now we only need connect the HP Procurve switch 2610-24 to the serial port,with a cable RJ45- RS232 rescued from an old router Cisco;
If you want to use the MAC address from an old router that you are replacing with your new router, you should first determine the MAC address of your old router, then manually enter it into your new router. .
An older router may need to be replaced to properly support your VoIP system.