Examples of using Bracket can in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Bracket can be rotated around 360°.
Without the spacers, the bracket can fit up to 31mm handlebars.
The bracket can be packed into the radiator.
A 180 turn on the bridge on the glasses is enough- and the bracket can be folded from both sides on the lenses.
The bracket can also be used on the ceiling.
This extremely versatile bracket can be used in three ways: as a camera grip, swivel arm or tripod.
Bracket can slip over rim of open-head drum or be wall mounted.
A steel cantilevered bracket can be used to hold up an existing structure on piles as illustrated above.
Bracket can be taged with a tag(PKGP58381- 20x) for indentification.
Thanks to the variable textile tape, the bracket can thus be fitted to any bicycle handlebar, also oversized handlebars, without any difficulty and without tools.
Bracket can be freely separated, disassembly delivery can save shipping costs.
The bracket can be secured with zip zies.
The Bracket can be pulled forward if more space is required.
The bracket can be mounted on a wall by means of two screws provided.
The bracket can also be used with BeoVision 10 46 and BeoVision 10 40.
The bracket can easily be placed on a light stand thanks to the spigot.
The bracket can also be opened to put the effect on any horizontal surface.
The bracket can be screwed on the railing or handrails permanently or just temporarily.
The bracket can also be removed for fan/radiator mounting as well as taken off completely if not being used.
The Bracket can be installed in less than 1 minute to the A360X or A360 and A Series Gooseneck.
This bracket can now be screw fixed to a wall if your customers wish to wall mount their STB.
The bracket can be attached to the upper hole of the water filter with a standard M5- self-tapping screw.
This bracket can be fitted to cars with and without ABS, and there is no need for a specific ABS adapterplate.
The bracket can also be removed for fan/radiator mounting as well as taken off completely if not being used.
The bracket can be fixed at both ends of the outside transmitter so that it can be mounted on any flat surface.
This bracket can only match HC-SR04 ultrasonic ranging module, the other ultrasonic modules can not support.
The bracket can be detached from the ULTITOP by removing a single screw for easy access to the pump. Technical Details.
The front bracket can be fitted up to approx. 8 cm higher than the rearbracket if it helps provide a good connection.
This sound bar bracket can be used in combination with Vogel's cable columns(CABLE 10 or NEXT 7840) to easily hide and guide your cables.
The KL 1 and its bracket can be fitted on the license plate holder or on the license plate itself using the mounting strips supplied.