Examples of using Button blinks in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The button blinks when the.
The red LED above the button blinks.
The button blinks for 5 seconds.
Also, when the fan stops, this button blinks.
The button blinks for some seconds;
The indicator of the PinP button blinks.
Button blinks first and then stays lit.
The Warm milk froth button blinks for confirmation.
Button blinks 3 times: confirm the new water volume.
If the connection is lost, the button blinks slowly.
Button blinks 3 times to confirm the new water volume.
The corresponding LED below the SELECT button blinks.
The button blinks orange when the MC200Air is in network setup mode.
There is an audible signal and the LED pilot lamp of the“ON/OFF” button blinks!
The LED above the button blinks, and“FREEZE” is displayed in the upper right corner of the monitor.
When the descaling cycle is finished(water tank runs empty), the Cappuccino button blinks.
Also with the unit in pause mode(Play/Pause button blinks) the jog wheel is used to set a different start point.
If the batteries are almost empty, the video light switches off and the LED button blinks quickly.
Charcoal filter: After 120h of motor operation, the LED of the P1 button blinks for 30''every time the motor turns off.
While the unit is playing and after the cue point has been programmed, pressing CUE will cause theCD player to enter the PAUSE mode(PLAY/PAUSE BUTTON blinks) at the programmed cue point the CUE LED is lit.
The red LEDs next to the button blink.
The Cappucino and Macchiato button blink alternatively.
All buttons blink simultaneously for 10 seconds and then machine switches off automatically.
All buttons blink 3 times: all volumes are reset.
The buttons blink progressively faster as the keyboard's octave shifts in each direction.
All buttons blink 3 times: all volumes are reset.
Programmed buttons blink 3 times: water hardness is set.
Preparation buttons blink alternately: emptying mode is in progress.
All 6 buttons blinking fast 3 times and then machine goes back in ready mode.