Examples of using Button lights in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
When the h button lights up and 8.
The LED INSERT above the button lights.
The button lights blue and the display indicates.
The red LED above the button lights.
The button lights up blue, when the view is activated.
Make sure the button lights up.
The button lights and the filter fade function is set to off.
If there is a connection failure the button lights red.
Note: Other button lights are off when this button is selected.
When the sound is muted the button lights red.
The button lights green when AirPlay is active and connected and blue when DLNA active and connected.
If a wi-fi signal is not found the button lights red.
The button lights up when the LP-380 enters the Function mode and blinks when it enters the MIDI function mode.
(B) is shown and the LED above the button lights up constantly.
When pressing this button during playback, the unit switches to still frame playback and the button lights.
PH14A only: red lamp adjacent to ON/OFF button lights“Help“ display blinks.
When pressed, the button lights red and the Trigger Pads change from sending note information to control change information.
When the DLNA input is active the button lights blue.
Tween replay(LED above the button lights up constantly) and pause LED above the button flashes.
When the AirPlay input is active the button lights green.
During the starting procedure, the button lights up at full brightness until both HDD LEDs(3) shortly light up after approx. 80 s.
Selector switch MONO Switches the master channel to mono button lights.
When it is put into standby, the button lights red for 10 seconds then turns off.
When pressing this button, recording starts and the button lights.
During the replay,(B) is shown and the LED above the button lights up constantly.
Set the transmitter to the same ID No- REMOSET transmission-Press the button REMOSET(3) During the REMOSET transmission, the button keeps flashing rapidly As soon as the settingshave been transferred to the corresponding transmitter, the button lights permanently.
Long actuation of the button[%]activates the pitch slide control and the control LED above the button lights up basic setting.
When pressing this button, the unit starts playback and the button lights.
For this, keep the button REC pressed until the LED above the button lights.
When the recirculation mode is activated,the warning light below the button lights up.