Examples of using Buzzer is in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Active buzzer is characterized by.
For continuity tests, a buzzer is provided.
The buzzer is by default always off.
Two beeps mean, that the buzzer is activated.
Passive buzzer is characterized by.
For the continuity measurement a buzzer is provided.
The buzzer is by default always off.
The volume of the buzzer is not affected.
A buzzer is provided for testing the continuity.
One single beep means, that the buzzer is deactivated.
Buzzer is an optional selection Applicable to SAL-U-3.
BELL SET-UP The internal buzzer is intended for quiet areas.
A buzzer is the emerging stage of the Chironomid midge.
In Buzzer alarm mode the volume of the buzzer is fixed.
The yellow buzzer is just the right tool.
The Alarm Out LED is lit when alarm output or internal buzzer is activated.
Buzzer is an integrated structure electronic transducers, DC.
Furthermore, it is possible to test diodes, and a buzzer is integrated for testing continuity.
A Piezo buzzer is used for the alarm output, but it cannot be deactivated.
If you press it again after the buzzer is muted, the buzzer will beep again.
The buzzer is continuously active as soon as contact is established(circuit closed) and if the resistance value measured is lower than the threshold value chosen by the programming adjustable from 1 to 40 Ω, see§ 03.12.10.
In case the LEDs, the F-Keys or the buzzer is required, please connect the display with RS232 to the PCD.
Buzzer is an integrated structure of electronic transducers, DC power supply, widely used in computers, printers, copiers, alarms, electronic toys, automotive electronic equipment, telephones, timers and other electronic products for sound devices.
When profiling temperature, the buzzer is simple to deactivate as the probe is lowered to depth.
By default the buzzer is“on” allowing you to hear the system's beep messages and warnings.
Please Note: If the buzzer is switched off it will not sound in Alarm Mode.
The switch position buzzer is used for checking continuity and contact resistance.
EAO buzzers are audible warning devices.
Buzzers are a simple and inexpensive means of providing communication between electronic products and the user.