Examples of using Clock mode in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The left switch determines the clock mode.
In clock mode, press and hold the TIME button down.
When the scanner is in Clock Mode no beep is generated.
In clock mode, press and hold the ALARM 1/2 button down.
Press ALARM button(13) to enter in normal clock mode.
The scale is now in clock mode and ready for use.
Clock Mode: 1-Step, 2-Step for both Master and Slave operation.
Optical cable from ADAT In to ADAT Out, clock mode Master.
How to select the clock mode as the main display mode. .
The device will go directly into standby mode clock mode.
Up to 24 days in clock mode and daily activity measurement.
Operating time: up to 40 hours in UltraTracmode, up to 16 hours in GPS mode and up to 14 days in clock mode.
Sync Ref has to be set to TCO and Clock Mode must be set to AutoSync.
In the Clock mode, press MODE ENTER button once to show the Alarm1.
After you have set the day, the clock mode appears again.
Clock mode 12Hr/24Hr Touch[12Hr] or[24Hr] to switch clock mode. .
Press the T-SET button 4 once in the clock mode or twice in the weighing mode. .
In clock mode Master the synchronous operation to the internal clock is checked.
The temperature, distance and pressure units you set in the Clock Mode will apply to all modes. .
In Clock mode, press the RADIO button to turn ON the radio, the frequency will be displayed on the LCD.
For example: Play back the file crest_16.wav using the DIGI96,connect output to input(Clock Mode Master!) and start the Level Meter.
In Clock mode, press and hold for 2 seconds to enter clock, calendar and temperature format setting mode. .
Outputs without processing, faders for 1/2 set to 0 dB,7/8 at -20 dB, clock mode master, saved in Setup 1.
Operating time: up to 42 hours in UltraTrac mode, up to 19 hours in GPSmode, up to 8 hours in GPS/music mode and up to 12 days in clock mode.
The clear structured, easy to understand window plus the uniqueinformative status windows for input signal, clock mode and sample rate make your work with the card to a real pleasure.
Inputs with no processing, gain set to +30 dB and phantom power active. Outputs without processing, faders for 1/2 set to 0 dB,7/8 at -20 dB, clock mode master, saved in Setup 1.
The exclusive Enhanced ZLM process from RME, which can be found in all RME cards of today,removes this restriction and allows for monitoring the input signal independent from clock mode and sample frequency, also for different data rates at input and output, and is available both with ZLM and ADM operation.
Just click on the hammer symbol in the systray of the taskbar and the settings dialog of the HDSPe AIO comes up. The clear structured, easy to understand window plus the uniqueinformative status windows for input signal, clock mode and sample rate make your work with the card to a real pleasure.
PTT/SELECT/SNOOZE button- if the radio is in PMR BAND, press this button for transmitting,and release it to receive. When MIDLAND BASE CAMP is in clock mode or synchronized on whatever other BAND, pressing this button while the alarm clock is ringing, you postpone it. snooze.
The exclusive Enhanced ZLM process from RME, which can be found in all RME cards of today,removes this restriction and allows for monitoring the input signal independent from clock mode and sample frequency, also for different data rates at input and output, and is available both with ZLM and ADM operation.
