Examples of using Coating can in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Glossy coating cannot be added.
Conventional processes such as nitration, boration and coating cannot be used.
Why does LOW-E coating can reflect heat?
The coating can be removed and cleaned if necessary.
The requirements for a coating can vary greatly.
The coating can be used with a brush or sponge wash water and easily.
The protective cover with soft touch coating can be used as weighing tray.
Coating can be carried out only in the absence of cracking and/or tearing.
With this dilution the coating can be applied by both brush or air gun.
Coating can be carried out either for the entire substrate or for sub-sections.
Intelligent material processing A coating can be 1-4 Âμm thin and up to 6 times harder than steel.
CDP coating can thus be used almost anywhere, regardless of color and surface structure.
The interaction between processing by OTEC and the coating can increase the tool's output 10-fold.
Such a coating can be made of aluminum tape of the required length.
Both the bandwidth(depending on the wavelength) and the effectiveness of the coating can be influenced by the various designs and different coating materials.
The coating can be a micro-fine powder, a liquid or a solidified melt.
The spots with the coating can be solved with acetone or soap solution.
The coating can be produced with cost-effective industrial coating processes.
Condensation on a just applied, uncured coating can create numerous problems varying from stains or gloss problems to delaminating of following layers etc….
The coating can be used in air or under vacuum up to 1900°C, on graphite up tpo 1500°C.
Uniform mixing, granulation and coating can be conducted in a short time, and dense spherical granules(100μm-3mm) are obtained.
The coating can be applied precision-metered and reproducible at any time through spray application.
In the summer, Low-E low-radiation coating can reflect the outdoor heat radiation, reduce the outdoor heat to the indoor transmission, so as to keep the room cool.
The coating can be applied like a paint, but when exposed to fire, it forms a ceramic shield.
This coating can be used not only for walls, they can update the kitchen furniture.
The coating can be applied reliably to different metallic surfaces such as steel, titanium or aluminum.
The coating can be applied directly at the customer's production site and allows for existing crucibles to be retrofitted or upgraded.
The coating can be carried out in a single or multi-layer system and also be used for the construction or repair of rotor blades.
Removing this coating can cause discoloration and in some cases cause the siding to look like a completely different color.
The coating can either be left as it is after this treatment or further enhanced with decorative dyes and other performance-improving additives.