Examples of using Common anode in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
LED with common anode.
Common anode for lamp testing.
Segment Display Color: red, common anode.
LED with common anode LED Supply.
Output: 12 volts DC/ RGB and common anode(+) max.
Display common anode for the four red LED.
Lighting systems or light signals with common anode.
Available in CA Common Anode- common plus.
Interconnection potential-free common cathode common anode.
BDA-22-2/ 22 diodes with common anode in two groups.
Tableau adapter for eight dry contacts and twelve LEDs with common anode.
Diodes with common anode in two groups Possible application Simple lamp test.
Segment LED display with four digits, common anode, speaker eMOD-l 021l.
It is a common anode, IE, the segments light up with 0V(LOW) and with 5V HIGH.
The TLC5940 is a LED driver IC,which we use today to drive 5 RGB LEDs with common anode.
The RGB Strip has used a common anode, which should be true for most RGB LED stripes.
Operate on the controller and remote controlInput: 12 volts DCOutput:12 volts DC/ RGB and common anode(+)max.
The PWM input signal is common anode(CA) and the output signal is common cathode CC.
The output voltage corresponds to thesupply voltage of 5-24 V. Available in CA Common Anode- common plus.
According to your requirements common anode and common cathode can be combined in one device as well.
Below you can see the circuit, where the PNP transistors are with the collector to common anode, with 1 k in series with the base.
The common anodes of the RGB LEDs are connected to +5 V and the Arduino is also still connected to the power supply.
Two versions are available: CA(common anode- common plus) and CC common cathode- common minus.
This LED RGBW neon flex is fully compatible with Fibaro RGBW LED Controller,Rako or ANY conventional common anode LED controller available on the market.
It consists of 20RGB leds with common anode and two 16-pin socket terminal strips that connect the display part to the controller part.
The DMX-LED-Dimmer X9 isespecially designed for controlling RGB LED-stripes with common anode(+) and can also be used for unicoloured LED-stripes.
Although the stripe has a common anode(+) the cable is usually in black, which may lead to confusion.
Hi-Line RGBW LED tape is fully compatible withFibaro RGBW LED Controller, Rako or ANY common anode LED controller available on the market.
LED Wireless Controller Constant Voltage 12 V-24 V IP20 Wireless Receiver with Dimmer(up to 25% Brightness)and Controller Function for the Control of Single-Color and RGB LEDs With Common Anodes.
Due to the fact that the outputs are designed aspush/pull power amplifiers, they are suitable for both- conventional daylight signals with common anode as well as for daylight signals and/or lighting strips with common ground(common cathode), as is the case with some Viessmann® signals.