Examples of using Conductivities in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Ideal for soils with high conductivities.
Thermal conductivities from 10 W/mK up to 50 W/mK.
Precise measurement also at high temperatures/ conductivities.
Conductivity probes for low conductivities are available on request.
Ionic conductivities up to 0.241 S/cm(300 C) and high densities can be proven.
The low-cost solution for measuring low conductivities in water/wastewater applications.
This probe guarantees anexact measurement even at high temperatures and conductivities.
Allows different conductivities to be set, from 80mS/cm to 800mS/cm.
This could lead to new applications such as switching between differing conductivities.
Local electrical conductivities can also be shown on micron and submicron scales.
The electrolytes used by the Swiss scientists have already recorded similar conductivities at 70 degrees.
When measuring media with low conductivities the electrode has to be moved sufficiently!
The characteristics of the cell that affect impedance include the integrity of the plasma membrane, cell volume, and intra-and extracellular conductivities.
Of the 18 tested intervals, 14 had hydraulic conductivities between 3× 10-12 and 3× 10-11 m/s.
Higher hydraulic conductivities, of the order of 10-6 m/s, were measured in the upper parts of boreholes SB3 and SB4, partly in the marl and in the Rutschmasse formation.
For precise and reliable measurement of low and very low conductivities, particularly in ultrapure water.
Interpreted hydraulic conductivities range from 10-13 m/s to 10-7 m/s for the Valanginian Mari.
In many cases, the solid phase canbe made up of differing materials with different conductivities, and there can also be a number of differing fluids.
Hydraulic conductivities can be reliably estimated or interpolated with less than 100% recovery to formation static pressure conditions.
By using oxidic and phosphatic solid electrolytes, conductivities in the range of 10 -4 to 10 -3 S/cm are achievable 1.
Hydraulic conductivities were estimated for 36 of 37 tested intervals, and specified with recommended values for 30 intervals, covering the crystalline rock portion of the Weiach borehole and describing every sedimentary formation mentioned above.
These samples revealed no detectable water flow at pressure drops up to 90 bar, i.e.,their hydraulic conductivities were smaller than 4·10-14 m sec-1.
Through its extreme anisotropic conductivities up to 1,950 W/mK in-plane x-y and very high conductivities up to 25 W/mK in the z-direction the thermal flow is directed efficiently and maximised by heat spreading at the same time.
The main disadvantage of today's fuel cell systems is their lack of CO tolerance,inadequate conductivities at low and moderate temperatures 100-130° C;
By incorporating doping ions or substituents, metal-like conductivities and other exceptional properties are obtained- from organic light-emitting diodes(OLEDs) to polymer solar cells or conducting polymer-based supercapacitors devices and electrodes.
The lithofacial unit'Arietenkalk' consists of partly clayey and sandy limestones andshowed low conductivities in the Benken, Weiach, Riniken and Schafisheim boreholes.
For the calibration of conductivity measuring cells that are intended to be used in water with conductivities below 150 μS∙cm-1, we offer a calibration service in a closed circuit. Measuring principle The measurement of the electrolytical conductivity of electrolytical solutions is conducted using a primary piston-type cell that was developed at PTB.
Extension of the measuring range for the electrical conductivity Currently, work is underway to extend the measurement range to lower conductivities(< 0.5 MS/m), to characterize semiconductor materials.
Robust 2-electrode sensor,for precise and reliable measurement of low and very low conductivities, particularly in ultrapure water, digital, with Memosens technology.
These grades of aluminum(1050, 1060, 1100, 1145, 1200, 1230, 1350 etc.) are characterized by excellent corrosion resistance,high thermal and electrical conductivities, low mechanical properties, and excellent workability.