Examples of using Current input in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Current input for shunt-resistor of 60mV-type.
Update the filter with the current input.
Accuracy current input: 0.125% of measuring range.
Weight: 0.7 kg Connection: screw-type terminals current input: 4 mm2 max.
MA- active current input connections of a sensor 4….
Description 2/4 Count inputs+ 2/4 current input with common.
Active current input for connec-tion of a sensor(4… 20 mA) Sensor.
CTRL+ ENTER fills the selected cell range with current input.
Signal type binary, current input for NAMUR sensors.
Upgrade of LIQUISYS-M basic version by 4 contacts and current input 4-20mA.
The fourth current input can be used for N conductor measurement.
LEach clamp meter has positive andnegative ends:"+" is the current input and"-" is the current output;
Their low current input and small footprint will become your advantage.
Pressing the edit select buttons moves through the available parameter pages for the current input or output.
Current input(DC 0 20 mA) Apply a defined signal of DC 1 mA at the measuring input. .
The unit has an active current input to which a transmitter can be connected.
Current input- 360 mA@ 5 VDC(without load)- 1800 mA@ 5 VDC with full load on the USB ports.
OR Change the Touch setting in the OSD menu tomatch the current input seeAdjusting projector settings on page 19.
Passive current input for connection of a signal condi- tioning instrument VEGAMET….
In addition to the digital I/Os, an analog voltage input(±10 V DC with a 16-bit resolution)and an analog current input are integrated.
Touch is disabled if the current input doesn't match the Touch setting in the OSD menu.
AJA's free Mini-Config software can be used with any USB enabled AJA Mini-Converter andprovides an easy to use graphic interface with detailed information about the current input and output formats.
AI2 Analog current input X-Y mA analog input, where X and Y can be configured Factory setting 4- 20 mA impedance 100 Ω.
Alternatively, the temperature sensor can be connected to a 4-20 mA current input(2-wire current loop) through the built-in 2-wire transmitter.
Current input: 165 mA for 10 V supply 125 mA for 15 V supply 70 mA for 24 V supply 58 mA for 30 V supply for current output 24mA.
Liquid gas(propane/butane) Operating pressure: 30 or 50 mbar(refer to nameplate) Rated thermal output E 2800(A): 2800 W E 4000(A): 3700 W Gas consumption E 2800(A): 110/ 225 g/h E 4000(A): 150/ 310 g/h Air flow rate E 2800(A): 70/ 140 m3/h E 4000(A):120/ 190 m3/h Current input at 12 V E 2800(A): 0,5/ 0,8 A E 4000(A): 1,0/ 2,3 A Current input at 24 V E 2800(A): 0,4/ 0,6 A E 4000(A): 0,6/ 1,06 A Standby: 0.01 A Weight: approx. 10 kg.
If we connect our second current input in series, we get 540 Ω"loop resistance" and a maximum current of only 27.7 mA can flow.
On the basis of a revised presentation of current input and output indicators the cornerstones of the regional innovation system on the en tire economic level are indicated.
Power input: 1050 W Voltages: 100 V, 110 V, 115 V, 230 V,240 V Current input: 9.6 A, 8.7 A, 8.5 A, 4.2 A, 4.2 A Frequency: 50-60 Hz Weight: 7.9 kg Dimensions: 495×259×114 mm Speed under load: 255 and 185 r. p.m.