Examples of using Current transformer in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Type to accept the current transformer 545 209 003.
Schneider Electric SA-62 new and 2 updated datasets with current transformer.
If need current transformer? Its quantity and ratio.
Its working principle is the same as that of current measurement by current transformer.
Not isolated from the current transformer input or the sensor input.
Why does the FBox for the AWD3 display a wrong current in case a current transformer is used?
The very compact ELEQ RM27 current transformer is especially designed for connection to digital measurement systems.
At this point, the unit acts like a conventional current transformer with poor linearity.
The device evaluates the current transformer as per the IEC or IEEE standard within seconds with the push of a button.
You don't have to worry about the fall on diodes and its variation with temperature because the current transformer is a nearly perfect current source.
ZM8C-H: Basic module 8 inputs for current transformer and extended voltage range: L1, L2, L3 to N each 90- 440 VAC.
Current transformer, communication lines and equipment, database, software, analysis tools and reporting software, etc.
With the push of a button, the device evaluates the current transformer as per the IEC or IEEE standard within seconds.
The current transformer has a transmission ratio of 150 A/1 A and fulfills the accuracy class 0.5 per DIN EN 61869-2.
Active and reactive energy metres(direct measurement up to 100 A and current transformer up to 6,000 A) on single- and three-phase networks.
The DIN railcurrent transformer comprises a terminal strip, current transformer and the voltage tap terminal with fuse.
The selection of the metering range should be determined according to the unit voltage, the ratio of the current transformer and the rotor winding voltage and the shunt ratio.
The charger plug, current transformer, and rectifier are examples of the range of new power electronics being introduced into the car.
A second auxiliary isolated analogue input is available, which can also beconfigured for a linear input, potentiometer or current transformer.
Version C featuring an external current transformer, it is capable of measuring loads exceeding 10 KW.
The currents to be measured can be determined directly at individual current supply cables(single insulated conductors)in equipment similar to a current transformer.
This current transformer is availble in classes 0.2, 05, 0.5s and 1 and in the protection classes 5P10,10P10, 5P20, and 10P20.
MA- Various supply voltages- Compact DIN rail mounting- 1 A or 5 A input-For direct or indirect current measurement- Current transformer connectable- Easy to operate.
If the surface of the current transformer discharges, the surface of the transformer may be dirty so that the insulation is reduced.
Wire Loop Current Indicator for measuring the current of the glow-wire, with digital display, measuring range 0… 160 A,class 1, with a current transformer.
Current transformer oils in use are mainly mineral oils, mineral oils are petroleum distillates, and mineral oils used in transformer oils are mostly naphthenic oils.
Current1 transformers with a lowerprecision class lead in the complete system- current transformer+ measuring device- to a lower accuracy of measur3ement, which is defined in this case by the precision class of the current tran4sformer.
With the advantages of simple structure and reliable performance, it can be made into super high pressure grade(such as 362kV),and it can be conveniently used with current transformer, and it is also suitable for outdoor use with little impact on atmospheric condition.
The phenomenon of overheating, smoke emission, and fluidity in the current transformer may be caused by poor connection of the primary side wiring, serious oxidation of the surface of the secondary side terminal board, short circuit between the turns of the current transformer, or insulation breakdown of the primary and secondary sides.