Examples of using Ethernet link in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Ethernet Link Status green LED.
Support of Ethernet Link status in C.
Ethernet Link Activity yellow LED.
Dial-up via DSL, Ethernet link or premium DSL.
Ethernet Link/Act and Speed.
LEDs Power/Wi-Fi Protected Setup, Ethernet link, activity.
LEDs: Power, Ethernet link, Wireless, Status, and Error.
Green LINK Ethernet LED on Ethernet link activated.
Ethernet link(IP: DHCP or fixed) 1500 standard and default.
The oratis compact is connected via an Ethernet link.
Super fast, low latency ethernet link for video, audio and control!
A guest with 2GB of memoryshould take several seconds on a 1 Gbit Ethernet link.
Green LINK Ethernet LED off Ethernet link not activated.
A guest with 2GB of memoryshould take an average of ten or so seconds on a 1 Gbit Ethernet link.
Remote viewing of operator menus over Ethernet link and VNC Server Software.
It uses an USB type A connector to connect to the USB host computer,and a RJ-45 connector to a 100BASE-TX or 10BASE-T Ethernet link.
LED indicator for E1 link, Ethernet activity, Ethernet link and Ethernet speed.
Models 8018 DeskPhone: A reliable, full-featured, eco-friendly IP phone with a three-line screen,USB connector and Giga Ethernet link.
PMX provides a standard industrial Ethernet link to many common standards in automation technology.
Finisar's FTLC8281SCNM 100G CFP transceiver modulesare designed for use in 100 Gigabit Ethernet links over multimode fiber.
Used in conjunction with special cables, Ethernet links are generated to the respective data processing devices.
The MIPP, a termination panel for cables that need to be connected to active equipment such as switches,Industrial Ethernet devices and any other device with an Ethernet link.
Relay alarm supporting 24VDC at 1A for notification of Ethernet link and PoE power events.
Once configured for runtime, the Ethernet link can be disconnected or used to communicate with other devices on the factory floor, such as PLCs.
It will get into standby mode,if you plug the device to outlet and no Ethernet link detected after booted and 60 second later.
In a point-to-point deployment, multiple paired MicroN units can provide all of these capabilities plus support for up to 12 bi-directional SDI I/Os, two MADI I/Os,and a Gigabit Ethernet link.
The Gigalight 10GBASE-T SFP+ copper transceiver(GE-XB-P7RC)is designed for 10GBASE-T Ethernet links reach up to 100m over Cat6a copper cable.
By enabling downshift, you allow the device to operate an Ethernet link with a lower transmission rate if the available speed is lower due to the cabling.
The Gigalight 10/100BASE-T SFP copper transceiver(GE-FB-P2RC) is designed for Data Center 10/100BASE-T Ethernet links reach up to 100m over Cat5 copper cable.
The measurement results are recovered from the PEL100 via a USB,Bluetooth or Ethernet link, or by means of the SD card with the PEL Transfer software.