Examples of using Figure e in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Removing SDS-plus Drilling Tools see figure E.
Working without Automatic Levelling see figure E.
Turn over the power tool as shown in figure E and place on a sturdy worktop.
Attaching the two-part sanding plate see figure E.
F Using a screwdriver, unscrew the screw 2(Figure E) of the adjustment lock from Position 1.
Working with the Laser Receiver(Accessory) see figure E.
Changing the Sanding Arm(see figure E)- Remove the sanding belt 12 see section“Changing the Sanding Belt”.
Keyless Chuck(PSB 1000-2 RCA/PSB 800-2 RA) see figure E.
Removing Drilling Tools without SDS-plus(see figure E)- Firmly hold the retaining ring of the quick change keyless.
Switching between Screwdriving, Drilling and Impact Drilling figure E.
Vertical operation(see figure E): The measuring tool generates a vertical laser line out of the front laser beam exit opening 1.
Check the expiry date printed on the pen See Figure E.
Transferring Angles(see figure E) Measure the angle to be transferred by applying the base leg and the fold-out leg to the reference angle.
Attaching“Cut Control” to the Sliding Shoe(PST 1000 PEL) see figure E.
Figure E: guide the lug of the shaving head 9 under the edge of the housing and press the shaving head downwards onto the blades until it is heard to lock in place.
Check that the liquid is clear and colourless in the medication window Figure E.
Removing the Extraction Device(see figure E) For disassembly of the extraction device 14, press release button 22 and pull off the extraction device 14 toward the front.
Check that the Zinbryta medicine is colourless orslightly yellow See Figure E.
Figure E: Care about will never stopping, consider more and more details: All the corners of the cabinet are circular arc design, which can effectively prevent human injury, and effectively prevent scratching to protect charging equipment.
Turn the MB-D10 battery-chamber latch to and remove the battery holder Figure E.
When sawing,ensure that the cutting direction is from the front backwards(see figure E) or from the top downwards(see figure C)!
Step 5: Click on the Next button to select the Scan Method that you want tomake use of, as shown in Figure e.
In addition to the automatic cleaning pro gramme, the brewing unit(5a)should be removed regularly for cleaning Figure E at the beginning of the instructions.
Accuracy Check and Calibration of the MeasuringTool Checking the Measuring Accuracy see figure E.
In addition to the automatic cleaning programme, the brewing unit(5a) should be removed regularly for cleaning.See figure E at the start of the operating instructions.
Simply flip out footrest and place the Monitor on a stable,level surface Figure E.
For this, press the machine with the mounted sanding sheet onto the perforating tool see figure E.
Firmly tighten the attachment wheel byrotating it in the direction shown by the LOCK arrow Figure E.
Firmly holding the device, carefully lift out the battery 8 using a small, thin object(e.g. a paper clip)see figure E.