Examples of using Fluid temperature in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Current fluid temperature in˚C.
If this occurs, stabilize the ambient temperature and fluid temperature properly.
Ambient and fluid temperature -10℃~60℃.
Fluid temperature Adjustable, 0-100 °C flow temperature. .
Ambient and fluid temperature: -40 to 80°C.
Fluid temperature: enter the average fluid temperature here.
Our pumps' standard fluid temperature range is -100 C to +350 C.
Thus, temperature readings captured with the IR camera are reasonably accurate andequal to the fluid temperature.
Ambient and fluid temperature 0℃~60℃ No freezing.
The new gauge cluster provides adigital display of system information such as fluid temperatures, hour meter and operator settings.
The fluid temperature lies between -20 °C and +140˚C.
Applications Monitoring process or fluid temperature in installations, pipes or tanks.
At fluid temperatures of up to 110 °C, maintenance-free ceramic bearings ensure the pumps' long service life.
The used vinyl ester resin allows higher fluid temperatures up to 90 Celsius.
Ambient and fluid temperature -10℃~ 70℃, Non-magnetic switch.
COOL-FIT 2.0 is a PN16 system suitable for fluid temperatures from 0°C to +60°C.
The standard fluid temperature should range between 0 and 85Â °C.
With HZDRI needleprobes one can simultaneously measure holdups and fluid temperatures in several locations in hydraulic systems.
These are concepts using low fluid temperatures and large heat exchanger surfaces, which are attractive for use in renewable energy systems.
The valves are designed for long, maintenance-free operation,work reliably with fluid temperatures up to +140 C and at pressures between 0.4 and 8 bar.
Fluid temperatures during the bench test of the seal Dynamic seals are in use in all rotating equipment, such as pumps, agitators, and compressors.
The level sensors may be used for fluid temperatures of -25 °C to +50 °C version H up to +80 °C.
The fluid temperature range from -10°C to +110°C makes the new pump sets suitable for a wide variety of applications, from heating water to coolant transport and industrial recirculation systems.
Using our patented IGS thawing technology and fluid temperatures of 100°C, most thawing jobs can be completed in less than 24 hours.
The diaphragms Diaphragms are the parts that are most affected andstressed by the suction and pumping process, during which they must also resist to chemical aggression and fluid temperature.
Superiority proven in practice: HERMETIC pumps are useable at fluid temperatures from -160 C to +450 C, system pressures up to 120 MPa and power ratings from 1 kW to 690 kW.
They can be operated with electromagnetic or indirect pneumatic controls and work with fluid temperatures of -40 to +85 C- alternatively -20 to +140 C- and with allowable pressures of 0.4 to 8 bar.
The technical highlights of the valve module are:Operating pressure up to 16 bar, fluid temperature of 0 to +125 C, ambient temperature of 0 to+ 50 C, nominal diameter of 2.2 mm, connection size of 6 mm, PPSU housing material, EPDM sealing seat, stainless steel internal parts.
Color LIF Thermometry: In case the LIF tracer concentration is not constant, 2-color LIF thermometry is the best choice for fluid temperature measurements. ThisLIF imaging method uses the image ratio of two LIF emissions at different wavelengths(colors) to measure the fluid temperature.