Examples of using Function indicator in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Optical function indicator via LED.
The current setting can be seen in the function indicator 3.
LED function indicator color on the head.
Ensure that the battery packs are switched off function indicators do not glow.
The necessary function indicator starts to flash.
A- Appliance button ON/OFF B- Temperature regulation button C-Temperature and function indicator.
I minimal heat function indicator 8 glows green.
Function indicator flashes quickly Malfunction see section 5, on page 17.
III maximum heat function indicator 8 glows red.
Function indicator with optical and audible notification as per EN 14175-2•.
II medium heat function indicator 8 glows orange.
The battery pack switches itself on with the heat level I and the function indicator glows green.
The function indicator then fl ashes for a few more seconds.
Ensure that the battery pack 5 is switched off function indicator 8 is not lit up.
The function indicator light(5) illuminates when the plugged-in appliance is turned on.
For control, it has a function indicator with a two-color LED.
The function indicator goes off as soon as the batteries are fully charged after approx. 4 hours.
When the battery pack is discharged, the function indicator switches off and the insole is no longer heated.
To achieve optimum charging,the Tabletop vacuum cleaner must be charged until the function indicator goes off.
With power switch and function indicator, detailed operating instructions.
To switch the seat cushion off,repeatedly press the function button 7 until the function indicator 8 goes out.
When the battery pack 5 is discharged, the function indicator 8 goes out and the seat cushion is no longer heated.
LED Function Indicator Status 12| About the PowerConnect W-3000 Series Controllers Dell PowerConnect W-3000 Series Controller| Installation Guide.
After connecting the table vacuum to the charging unit or mains charger solo,the charging process does not begin no pulsating function indicator.
ELECTRONIC PROGRAMMER 1 2 3 456 1 Function indicators 2 Time display 3 Function indicators 4 Button+ 5 Selection button 6 Button.
A- Appliance button ON/OFF B- Temperature regulation button C-Temperature and function indicator D- Function button E- Confirmation button.
If the batteries are empty, the function indicator starts to fl ash and the safety system(cut-off/ automatic stop) switches the Tabletop vacuum cleaner off to prevent damage to the batteries.
Ensure that the mains charger with charging unit and the Tabletop vacuum cleaner are connected andthat the mains socket works the function indicator on the handle pulsates and indicates that the Tabletop vacuum cleaner is being charged.
Programmable electronic control system with LED function indicators is essential in order to meet diverse customer requirements safely and without any compromises.
And the Tabletop vacuum cleaner are connected and that the mains socket works the function indicator on the handle pulsates and indicates that the Tabletop vacuum cleaner is being charged.