Examples of using Hacklace in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
The Hacklace may have up to 32 apps.
Now you can send characters to the Hacklace.
Use the Hacklace to pimp your bike.
For other converter brands you have to remove the Hacklace battery.
Your Hacklace can become a codelock.
With only a single resistor and a NTC thermistor the Hacklace is transformed into a thermometer.
When the Hacklace is in download mode it displays"DL.
That the block is not just solid will only become apparent when the Hacklace is switched on.
The Hacklace comes pre-flashed with the Arduino bootloader.
With the Display-App the Hacklace can be used as a serial display.
The Hacklace will become very compact and fit easily into a housing.
With the battery monitor the Hacklace can check the voltage of its battery.
Hacklace_Main contains the firmware, that is pre-programmed on the Hacklace.
The sequence'\'causes the Hacklace to ignore the rest of the line.
The Hacklace can be supplied externally via the two larger round pads.
With only two components, a NTC02-10k thermistor and a 1k5 resistor, you turn the Hacklace into a thermometer.
The Hacklace hardware is described by the schematic and assembly drawings.
If you keep a gap between the battery holder and the board you can clip the Hacklace to your belt.
Hacklace offers you an easy and hands-on introduction sparking your creativity.
It takes only two additional resistors to enable the Hacklace to monitor its own battery voltage.
The Hacklace will then switch back to normal operation and display the first text, animation or app.
If you want to display short textmessages in an appealing way you might use the Hacklace as a serial display.
In normal mode the Hacklace will follow this list when browsing the apps by pressing the left button.
Often you like to put it at the position of the Reset-App(app-ID 31)so that after a reset the Hacklace starts operating as a display.
All routine tasks for operating the Hacklace are performed by the"HL" object which is an instance of class"Hacklace.
Download the Hacklace software as a zip archive(button"Download ZIP" down to the right) and expand it in your sketch folder.
The Hacklace software already contains several apps that are ready to use and can serve as examples for programming your own apps.
If the solder jumper J1 on the Hacklace board has been closed, you have to take care that the voltage from the converter is not impinged on the battery this can make the battery explode.