Examples of using Hall sensor in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Acewell Speed hall sensor with magnet.
Hall sensor for BMW R2V Boxer models from 9/1980 onwards.
Close Stainless steel hall sensor previous next.
The Hall sensor detects theRPM without contact.
Precise dosage by stepping motor with Hall sensor.
Error Code: Er The hall sensor is not working properly.
Connect the 9-pole Sub-D plug from the Hall sensor into“B18.
FrSky M7 Hall Sensor Gimbal for Taranis Q X7 will be bought with.
Measurement system Magnetic, with Hall sensor and magnet.
Hall sensor is attached to micro switch S1 with screw supplied.
Product details for FrSky replacement gimbal M9 Hall sensor for Taranis X9D Plus.
The Hall sensor is exposed to a magnetic field generated inside the test module.
Versions with pressure point, latching element, Hall sensor or potentiometer available.
A hall sensor is affected by EDI and RFI and must be protected against them.
The magnitude of this deformation is measured via integrated magnets and a Hall sensor.
Hall sensor und ultraschall sensor fragen 4 years 10 months ago 2378 nero76 Offline.
The control system has detected a short circuit at the Hall sensor or at one or more drives.
View inside the socket: The Hall sensor is fastened in the tip of the socket with a rubber disc.
Speed Sensor SP1M The speed sensor SP1M is a hall sensor measuring gear speed in transmission applications.
Dust-tight construction made with a silicone O-ring on the engine headallows sufficient drainage of the stator while protecting the Hall sensor from dust and dirt.
Placing the ignition Hall sensor on the second fixing position on the side of the crankcase, allows the ZG 20 to run clockwise.
It transfers, in a non-contacting manner, the rotary motion of the vane to a Hall sensor attached to the case in order to save space.
In the Lehle Mono Volume the Hall sensor, which is made in Germany, is accurately calibrated to the built-in magnet and the control range of the pedal.
BS brushless DC-Servomotor from FAULHABER, equipped with an analogue Hall sensor K1155, a 38A gearhead and an MCBL3006 S RS controller.
Built-in high-precision Hall sensor at the rear of the engine in combination with a balanced rotor guarantees the user a smooth and linear performance.
Pre-condition for the Hall effect is that some electric current flows through the Hall sensor, with a perpendicular magnetic field above the chip.
Measuring range with Hall sensor: 0.3 to 10 m/s(1.0 fps to 32.8 fps) from 3 l/min(0.8 gpm) in DN15(1/2") pipe with Coil sensor: 0.5 to 10 m/s(1.6 to 32.8 fps) from 5 l/min(1.3 gpm) in DN15(1/2") pipe.
Twist lock for sliding doors, ventilation flap& sorting gate: Our compact rotary solenoid with integrated Hall sensor or dampened stop saves space, is reliable and has a modular design.
SME Hall Sensor products are ideal in limited space requirements, surface mount, speed sensor- fast response, outputs beyond on/off, linear output, programmable, latching, polarity sensitive, and much more….