Examples of using Intel falcon in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Preparing the Intel Falcon 8+ UAV.
Intel Falcon 8+ UAV remaining battery voltage.
Payload Case** The Intel Falcon 8+ UAV.
Intel Falcon 8+ UAV without payload and batteries.
This case is used for all necessary parts of your Intel Falcon 8+ UAS.
The Intel Falcon 8+ UAS can be operated in three flight modes.
Congratulations on your new Intel Falcon 8+ Unmanned Aircraft System UAS.
The Intel Falcon 8+ UAV must always be flown with two batteries inserted.
The Intel Cockpit Controller uses the same battery type as the Intel Falcon 8+ UAV.
Controlling the Intel Falcon 8+ UAV from the Intel Cockpit Controller.
Download the latest firmware update and desktop software for your Intel Falcon 8+ UAS at.
UAV: Intel Falcon 8+ Unmanned Aerial Vehicle(UAV)- includes all flying parts.
Establish the initial connection between Intel Falcon 8+ UAV and Intel Cockpit Controller.
After the Intel Falcon 8+ UAV makes a 400 turn, land, and switch the complete UAS OFF.
It requires approximately 15 seconds to power ON,and is indicated by a triple beep from the Intel Falcon 8+ UAV.
The payload of the Intel Falcon 8+ UAS must be placed as shown in Figure 04.
You should already have experience flying a UAS, whichrequires control of the drone with a ground control station similar to the one included with the Intel Falcon 8+ UAS.
Switch ON the payload, the Intel Falcon 8+ UAV and the Intel Cockpit Controller.
The Intel Falcon 8+ UAS will save the calibrations with that exact payload, and remember it the next time it is used.
The Intel Powerpack Battery powers the Intel Falcon 8+ UAV, and the Intel Cockpit Controller.
When using the Intel Falcon 8+ UAS for the first time, some additional steps are required, which only need to be performed once.
When the payload stops moving, switch OFF the payload, the Intel Falcon 8+ UAV, and Intel Cockpit Controller.
When you unpack your Intel Falcon 8+ UAS for the first time, please make sure that all the items, which you specified in your purchase order, are included.
In case the connection between the Intel Cockpit Controller and the Intel Falcon 8+ UAV gets lost, the Link Loss Procedure is activated.
The Intel Falcon 8+ UAS automatically identifies the attached camera, and the menus on the Intel Cockpit Controller are changed accordingly.
The communication between the Intel Cockpit Controller, and the Intel Falcon 8+ UAV, is realized by two independent 2.4 GHz digital data links.
Place the Intel Falcon 8+ UAV on an elevated platform to make sure the payload does not hit the ground and cause damage when it tilts downwards.
The foam bolster cover(not shown) located on top of the payload,should be used to secure the payload when it is transported in the Intel Falcon 8+ UAS case, while it is mounted onto the UAV.
A drone Intel Falcon 8+ is conducting aerial inspection and a study of the Jiankou great wall China section, taking thousands of images in high resolution….
The first time the Intel Falcon 8+ UAV and the Intel Cockpit Controller are powered up, the Status Display will show the Start Screen, and it is necessary to set up the connection between UAV and Controller.