Examples of using Level shift in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
DC Level Shift input: insulated by photocoupler.
St digit form designation 0 DC Level Shift width coded.
A002: 1000pps, DC Level Shift pulse width coded, no carrier BCD time of year.
A modulation signal of an LFO becomes level shifted.
Pulse width modulated(DC Level Shift) signals are applied by using the D-Subplug.
TCR167PCI provides modulated and unmodulated(DC level shift) outputs.
DC Level Shift Input insulated by optocoupler with internal series resistance of 220 Ω.
They are available as modulated(3 Vpp/1 Vpp into 50 Ω)and unmodulated(DC Level Shift) signals TTL into 50 Ω and RS-422.
Unmodulated or‘DC Level Shift' time codes must be connected to the D-Sub-plug of the module.
The codes are available as modulated(3 Vpp /1 Vpp into 50 Ω)and unmodulated(DC Level Shift) signals TTL into 50 Ω and RS-422.
A003: 1000pps, DC Level Shift pulse width coded, no carrier BCD time of year, SBS time of day.
The IMS- TCR180 serves to decode and generate modulated(AM)and unmodulated(DC Level Shift) IRIGA/B/G, AFNOR, C37.118 or IEEE1344 time codes.
The unmodulated or'DC Level Shift' time codes are applied via pins 21c and 22c of the 64pin VG connector.
Care must be taken to robustly identify andestimate parameters as outliers(pulses, level shifts, local time trends) can wreak havoc.
St digit form designation 0 DC Level Shift pulse width modulated 1 sine wave carrier amplitude modulated.
During the Quantum Surf that occurred in the final three months of 2006,some of us experienced a core level shift that has catapulted us onto a totally new matrix….
Pulse width modulated(DC Level Shift) codes are insulated by an onboard photocoupler.
Integrated level shifting ensures you will be able to work at a variety of voltages ranging from 0.9 to 5.0 volts without needing any costly accessory boards.
The modulation of carrier amplitude(modulated codes) or pulse duration(unmodulated, DC level shift codes) is synchronized to the pulse per second(PPS) of the system based on the software clock.
A break below this level shifts the focus towards the lower parallels, currently~ 1.3020& 1.2980 s- look for a bigger reaction there.
Nd digit carrier resolution 0 no carrier(DC Level Shift) 1 100 Hz, 10 msec resolution 2 1 kHz, 1 msec resolution 3 10 kHz, 100 μsec resolution.