Examples of using Loadpin in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Loadpin with head and nut.
Never use the cable to lift or handle the loadpin.
Loadpin with head and splint.
Characterisation: The loadpin has to be mounted at the joint bar.
Loadpin with welded on anti-twist protection and splint.
This will allow the loadpin to bend freely in the outer support.
Loadpin offer a particularly easy way to retrofit existing systems.
Only appropriately qualifiedpersonnel must be allowed to work with the loadpin.
The loadpin is equipped with two independent sensor systems.
System interface:External analogue amplifier with two tresholds for alarm function Loadpin MB255.
The loadpin can be delivered with integrated electronics.
Because of its robust and simple design, the loadpin needs no maintenance if it is properly assembled.
The loadpin can be manufactured in a simple or in a redundant design.
Other forces from the environment such as vibrations, impacts, wind energy and temperatures mayfalsify the measurement result or even destroy loadpin.
Moisture in the loadpin as a result of sudden temperature fluctuations.
If sensors are used at temperatures of less than 0 C, they must not be cleaned with steam orhot liquids as this would cause condensation to form inside the loadpin.
The loadpin can be calibrated for other temperature ranges upon request.
When shoring or propping columns, ackrows and beams on construction projects require dynamic loadmeasurement Straightpoint wireless compression loadcells and loadpin solutions lead the way in accurate and reliable measurement and can feed back to a multitude of instrumentation and software for real time and datalogged audit trails.
So a 2 mV/V loadpin will provide 6 millivolt signal at full load when excited with 3v.
Loadpin is a proven design element that has been used for more than 50 years in metrology.
A two-axis loadpin(diameter: 40mm) was charged with 100kN.
Loadpin provide an easy way to integrate tool breakage detection and tool optimization into existing systems.
Retrofitted with loadpin: The subsequent use of force sensors is not always easy.
Loadpin can be tested as follows:(The values given are for a standard version load pin.) Resistance measurement of the load pin bridge, while disconnected from the amplifier.
Please note if you require a Loadpin to a particular size and design download our loadpin questionnaire and return POA.
The loadpin is normally calibrated for working temperatures of -10 to +40 C, at a limit temperature of -20 to +70 C.
Our Load shackles and Loadpin products can be manufactured for subsea use if required and output options such as 4-20mA or Modbus.
Shear Loadpin, a round loadcell that senses the force applied across it, via strain gauges installed within a small bore through the centre of the pin.
There are loadpins with integrated Can-Bus and external amplifiers, which are connected to the loadpin.