Examples of using Memo button in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Press and keep the Memo button.
Press the CH+/MEMO button for three seconds to store the Radio.
Press and hold the memo button.
E Push the MEMO button@4 again to exit MEMO mode.
Press and keep the Memo button.
Push and hold the MEMO button for more than 3 seconds while.
Press the TIMERbutton followed by the MEMO button.
Briefly press the MEMO button to save the number.
The operation mode changes to the setting stored with the MEMO button.
Press the COUNTER MEMO button at the desired point.
Press the button as shown below while the air conditioner is operating. a MEMO button.
Flashes for 3 seconds when the MEMO button is pushed during.
Press the MEMO button a third time to return to the standard display mode.
G(MEMORY) display Flashes for 3 seconds when the MEMO button is pushed during operation.
Press and keep the Memo button pressed for 3 seconds until an acoustic signal is heard.
H(MEMORY) indicator Flashes for 3 seconds when the MEMO button is pressed during operation.
Push the button as follows while the air conditioner is in operation. a MEMO button.
In CUE mode, push MEMO button@4 once to enable Memo set function.
To recall the stored cycle simply turnon the dryer, press the memo button and then start the cycle.
Store the settings with the MEMO button(9) and switch off the device with the main switch(5) again.
When you are finished recording your message, release the MEMO button and the message recording will stop.
B MEMO button Hold down the MEMO button for more than 3 seconds while the indicator flashes.
Then, press the MEMORY button or MEMO button again to store the station in the preset memory.
After having filled all of the 8 columns, press the MEMO button for more than 3 seconds to confirm the entry.
The setting stored with the MEMO button will be shown and the air conditioner operates based on the setting.
Operation modes which can be stored with the MEMO button are MODE, Temperature, FAN, TIMER and Hi POWER.
If you do not push the MEMO button within 3 seconds or if you push another button, the MEMORY setting is cancelled.
Press the MEMORY button on the front panel or MEMO button on the remote control unit for more than 3 seconds.
The setting memorized with the MEMO button will be indicated and the air conditioner operates with regards to the setting.
When the desired character is displayed, press the MEMO button to confirm the entry in this column and move to the next column.