Examples of using Mm jack socket in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
XLR/ 6.3 MM jACk SOCkET(COMBO) INPUT RIGHT.
Aux return with balanced 6.3 mm jack socket.
Mm jack socket for connecting a headphone.
Display is equipped with 2 x 3,5 mm jack sockets.
EN Mono input with 6.3 mm jack socket for acoustic or electric guitar.
Four infra-red(window emitter) outputs via 3.5 mm jack sockets.
Stereo line input with 3.5 mm jack socket for an MP3 player or other playback device.
The device that you use has to output audio data through a 3.5 mm jack socket.
The headphones are provided with a 3.5 mm jack socket on the right-hand earpiece.
Many electronic entertainment devices are equipped with a 3.5 mm jack socket.
Unbalanced line outputs with 6.3 mm jack sockets to connect active listening monitors etc.
The unbalanced outputs are each 3.5 mm stereo mini-jack sockets, the balanced four-pole 2.5 mm jack sockets.
AV output Yes(analogue, 3.5 mm jack socket) Video format PAL/NTSC switchable Ambient conditions.
Four variants are possible by connecting the 3.5 mm jack socket differently.
EN Unbalanced stereo line input with 6.3 mm jack sockets for connecting an external effects device(left input mono), or another source device.
The cable is equipped with a 3.5 mm jack on one side anda 3.5 mm jack socket on the other.
EN Unbalanced mono line output with 6.3 mm jack sockets to activate an external effects device POST Fader.
Here the transceiver even has two sockets, an RJ45 socket for connecting a Yaesu hand microphone and a 3.5 mm jack socket, e. g.
EN The control panelhas both a line input with an XLR/ 6.3 mm jack socket(combo) for balanced and unbalanced signal cables and a balanced.
This i-Connect cable delivers the perfect analogue stereo connection between a portable media player andan audio device with a 3.5 mm jack socket.
Unbalanced mono line outputs with 6.3 mm jack sockets to control an external effects device(POST Fader), or an active stage monitor PRE Fader.
If you wish to use a second pair of headphones,insert the jack plug from the second headphones into the 3.5 mm jack socket 4 on the right-hand earpiece 3.
Connection socket AUX-IN(3.5 mm jack socket) 3 Operating and charging LED 4 On/Off switch(POWER ON/ OFF) 5 Volume control(VOL+/-) 6 BASS switch(ON/ OFF) 7 Mini USB connection socket(POWER INPUT) 8 Speaker cable with 3.5 mm jackplug 9 Charging cable USB to Mini USB.
Nominal Output Power at 8 Ω: 2 x 150 W(RMS) Nominal Output Power at 4 Ω: 2 x 250 W(RMS) Nominal Output Power in Class A at 8 Ω: 2 x 10 W(RMS) Input sensitivity: 300 mV Total Harmonic Distortion:< 0.1%(1 kHz, 1 W) Signal to Noise Ratio:> 82,8 dB Input Impedance: 47 kΩ AC power connection type: 230 V/50 Hz Inputs: 5 x RCA stereo Outputs: 1 x REC stereo RCA, 1x PRE stereo RCA, 1 x USB,2 x Power Control(3.5 mm jack socket), 4 x 2 speaker clamps.
The control panel has both a line input with an XLR/ 6.3 mm jack socket(combo) for balanced and unbalanced signal cables and a balanced XLR line output for looping through the input signal, for example, to an additional powered stage monitor of the same type.

