Examples of using Monostable in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Astable and monostable multivibrators.
Adjustment range of changeover time in monostable mode.
More Push switch monostable safety light blue….
Monostable signal Signal is active for a defined period.
Comozzi 358955 5/2 way monostable valves are spool type.
Monostable relay module for radio receiver at 4 channel R93/RX14M/24.
Magnet switches are available in monostable and bistable versions.
Independent monostable relays with 2 changeover contacts each.
The receiver's relaycan be programmed to function in a bistable or a monostable manner.
Operating mode: monostable, bistable, timed, motor control.
This Atari Punk Console Pro is based on a classic APC circuitry,consisting of an instable square wave oscillator which controls a monostable oscillator, producing a pulse wave.
You can choose between Monostable-, Bistable-, Public Function or Polycode.
In monostable relays it means that the anchor does not return to the rest position after the excitation of the coil.
The MDT Shutter Actuator with monostable relays is individually programmable by the ETS.
Monostable function 2 sec active: To the impulse of transmitter the contact is activated and remains activated for 2 sec.
These inputs can be bistable or monostable switches, or various sensors.
As compared to the monostable AirBox, the bistable AirBox has two defined positions.
Relay with forcibly guided contacts, Polarized, monostable, special type UL approval 70°C.
The actuator of the interrupting chamber is of monostable type and enables the load-break switcher, during the closing phase, to make only negligible currents.
Flowmeter FM-200K-H/FA incl. sensor head, 2x fibre optics light guide FO1 andpre amplifiere K-FA-H for flow alarm monostable adjusted at 20% of scale heated at max.
Quick acting steel spool& sleeve valves- monostable function, threaded ports NPTF 1/4 92280 P557.
It is also possible to connect a bistable switch or monostable push buttons to its"I" input.
The terminal can always be equipped with 5/2-and 5/3-way valves with a DIN-plug of model series SF4000 where monostable 5/2-way valves are used for single stations, while 5/3-way valves are used for two stations.
With weak light pulses, the Schmitt trigger T3, T4 is not tripped back to its equilibrium position by the trailing edge of the light pulse,but is reset by the monostable multivibrator via CI; hence the reset time of the latter must be longer than the pulse length of the transmitter.