Examples of using Optional footswitch in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Optional footswitch for bypass and preset changes.
Can be turned on/off by an optional footswitch Tascam RC-1F.
Optional footswitch( RC-3F) and wired remote control RC-10.
External control via MIDI and optional footswitches or expression pedal.
Optional footswitch allows remote mid boost engage and dry blend override.
Reverb for each channel can be bypassed using optional footswitch.
Hands-free control with optional footswitches, an expression pedal and MIDI Control.
This is started by a microswitch which is incorporated in the handle, or an optional footswitch.
External control via MIDI and optional footswitches or expression pedal.
The optional Footswitch can be connected and used to switch the Vibrato effect on-off remotely.
And by connecting one or two optional footswitches.
Plug the optional footswitch in here to enable remote on-off switching of the Vibrato effect.
Remote switch jack for controlling pedal modes and bypass from an optional footswitch or effects switching system.
An optional footswitch connected to the EXP/SUS socket thus doesn't allow you to hold the notes you are playing.
Clean and Dirty channels can be switched onthe amp's top panel or remotely using the optional footswitch.
Separate power sockets, switchable via DMX,infrared remote control, and optional footswitch, for powering additional CAMEO lighting products.
You can activate the threechannels of the TOUR REVERB via the front panel CHANNEL SELECT buttons or an optional footswitch.
Optional footswitch(opposite) enables tap-tempo delay time control for echo, delay, delay plus chorus and delay plus reverb effects.
REVERB: Adjusts reverb level of channel one; reverb can be bypassed by setting knob fully counterclockwise optional footswitch does not bypass reverb.
There's also support for optional footswitches, allowing you to easily turn the JC-40's chorus/vibrato, reverb, and distortion effects on/off while performing.
The factory default is 0 s(„OFF“), i.e. air flows only aslong as the button on the hot air tool or the optional footswitch is pressed.
If you wish to lock the light output- e.g. via an optional footswitch(Blackout-mode), connect your footswitch via a stereo-jack plug to the Blackout-socket.
Recordings can be started manually, automatically by level, advanced(by up to 2 seconds), delayed(to prevent key presses from being recorded)or with the help of the included remote control or an optional footswitch.
If you want to control the LED multi-PAR lighting system either using the optional footswitch or by a second CLMPARCOB1(master) in one of the standalone modes, the"SLAVE MODE" must be selected.
If you wish to lock the light output- e.g. via an optional footswitch(Blackout-mode) or an Easy-2 remote control, connect your footswitch or Easy-2 remote control via a mono-jack plug to the Blackout-socket.
Remote control via 4-way footswitch optional.
Remote connector for optional RC-3F footswitch to enable hands-free control of several functions.