Examples of using Positive terminal in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Red positive terminal, black negative terminal. .
The centre pin of the adaptor is the positive terminal,“+”, and the two side clamps are the.
Positive terminal must be con nect ed first to prevent sparks from accidental ground ing.
Use the ring terminal to connect to the battery positive terminal.
People also translate
The monitor's positive terminal is indicated with a.
Connect the second terminal of the fuse holder to the positive terminal of the car battery.
For connection to positive terminal of car battery, see section 2.6.4.
The balance of charges is kept constant andthe hole is jumping from the negative to the positive terminal.
To access the positive terminal, remove the cover from the positive terminal Fig.1.
This range canalso be used for diode testing, the positive terminal being the source of the test current.
Connect the red positive terminal of the charger to the positive terminal of the battery(designation+) fig. 6 A, page 4.
Speaker connection OUTPUTS L-CH for the left channel provided as screw terminals;“+” is also provided as a positive terminal in bridge operation 10.
The base current of T2 is running from the positive terminal via R2, retaining the switching state of the circuit.
Connect the positive terminal of the right speaker connection on the amplifier(coloured red and labelled+r) to the positive terminal of your right speaker.
For example, in a battery the voltage at the positive terminal is +1.5 V relative to the negative terminal. .
Connect the red positive terminal of the right speaker connection on the amplifier(labelled R+) to the positive terminal of your right speaker.
Never use the inverter on vehicles where the positive terminal of the battery is connected to the chassis.
One is made of Zinc, known as the anode(the negative terminal) and the other is made of Manganese Dioxide,known as the cathode the positive terminal.
Before installation: Remove the positive terminal from the car battery first in order to avoid short circuiting.
If the hole has reached the negative terminal of the voltagesource, one electron is injected into the crystal lattice and simultaneously another one is extracted at the positive terminal.
Before installation: Remove the positive terminal from the car battery fi rst in order to avoid short circuiting.
Connect the positive terminal of the right speaker connection on the amplifier(coloured red and labelled+r) to the positive terminal of your right speaker.
Connect the other end of the red lead to the positive terminal(red cover) on the battery you are jump starting from.
Fix the wire in the positive terminal(pin from middle) and then twist it few times around the mesh and fix it on the negative pole screw.
Is the polarity of the battery connections correct(positive terminal on positive pole, negative terminal on negative pole)?
So the cathode is the positive terminal of, well, you can already imagine, this is a battery of sorts, right?
Special type with Z-soldering tags and flat positive terminal for the compilation of battery packs for cordless phones, models, etc.
Moreover please connect both Power 26-104 from positive terminal of first battery to negative terminal of second battery with cable bridge.