Examples of using Preheating time in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Short preheating time: 2 minutes.
Uninsulated and masonry stone walls extend the preheating time.
Grilled food Preheating time to setting 9, in minutes.
With the Fast Heat Up function you decrease the preheating time.
Sauna on request(1h preheating time) and only until 10pm.
Preheating time: 8min preheating 3min emergency detection.
Only place food on the grill when the preheating time has elapsed.
The preheating time specified in the dish's instructions must not be exceeded.
Maximum lamination width: 23 cm, Type: Hot laminator, Preheating time: 3 min.
The turntable preheating time cannot be changed.
Type: Hot laminator, Maximum lamination width: 32 cm, Preheating time: 4 min.
Short reaction time, short preheating time, quick and exact heating.
Maximum lamination width: 23.5 cm, Type: Cold laminator, Preheating time: 1 min.
Maximum lamination width: 23 cm, Preheating time: 4 min, Maximum document thickness: 0.125 mm.
Preheating time depends on the material and thickness of crockery and glassware.
Several oven levels is possible- shorter preheating times- low oven temperatures- gentle defrosting k.
Preheating time depends from the set temperature(adjust through the temperature controller[4, 5]) and the ambient temperature.
The medium-wave infrared heating without preheating time, heats up the material not only on the surface but also in-depth.
The use of a custom-made infrared systemenables heating of the pipe ends during production without preheating time and without contact.
Generally speaking, to delay the preheating time, we should select the relatively lower resistance, taller Tc point and bigger PTC Thermistor.
Tyl Steam 2/4/6 VB steam generator isideal for the privat use owing to the short preheating time and minimum service and maintenance costs.
Nano ICCS Impulse Relays are used to switch loads on and off for an individually defined time period-such as in control devices for preheating times.
The oil temperature may vary from the set temperature or the preheating time may take longer depending on the type, material, shape and size of the base of the pan.
To a certain electronic ballast, energy saving light, higher PTC thermistor resistance, smaller PTC ceramic body dimension, lower switch termperature, will lead to its lower power consumption,and shorter preheating time, conversely, large power consumption, and longer preheating time.
For this welding process, the preheating time for profile sizes of 46E2(U33) up to 60E1 has been standardised to 2 minutes, representing a process simplification for the user.
To a certain electronic ballast, energy saving light, higher PTC thermistor resistance, smaller PTC ceramic body dimension, lower switch termperature, will lead to its lower power consumption,and shorter preheating time, conversely, large power consumption, and longer preheating time.
Use the timer to set the preheat time approx. 10 minutes.
For oxyfuel, remember to include preheat time and lengthy secondary operations in the time required.
High-quality lamp management with the“SMART-Heating” concept of PCA ECOT5lp means perfect lighting solutions with preheat times of only 0.5s, dimming to 1% luminous flux and rapid dimming rates for up to 20 brightness values per second- ideal for sound and light applications for all T5 fluorescent lamps.