Examples of using Press reset in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Press RESET in the following cases.
Cancelling the programme Press RESET until.
Press RESET on the main unit.
Select a channel and press RESET.
Press RESET after each battery change.
If oven is operating, press RESET pad once to.
Press RESET to return to the default settings.
HACCP ALARM WRONG TEMPERATURE IN TANK- PRESS RESET.
Press RESET for longer than 4 sec to reset the displays for.
Open the Advanced tab and press Reset.
Press RESET using a ballpoint pen or similar object.
To return to the default settings, press Reset.
Press reset and give yourself a break by feeding your body only liquids for a few days.
HACCP ALARM WASHING DETERGENT FUNCTIONALITY DEFECT PRESS RESET.
Reinstall the battery and press reset as instructed above.
To reset an alarm message, eliminate the cause of the concern and press Reset.
Factory setting Press Reset all functions such as brightness, contrast, to the factory settings.
Open the Shortcut tab and press Reset.
Task 8: Press reset and choose the distribution of energy usage and the gross national product GDP.
Press RESET or disconnect the set from the power supply; reconnect after a few seconds.
When using with a Pioneer Navigation System, if you press RESET, be sure the ACC OFF is selected.
Press Reset data usage and set date when you receive bill from the network provider on a monthly basis.
When strange or incorrect messages ap- pear on the display% Press RESET with a pen tip or other pointed instrument.
If unit failed to synchronise with remote sensor, reset both the main unit and sensor ortry selecting a different channel and press RESET.
When using the MCX-CA15 as an amplifier for another system, press RESET on the inside front panel of the MCX-CA15 to reset this unit.
To switch back to the main display by pressing RESET.
Pressing reset will make the device reboot, which effect is equivalent to a force shutdown.
When that happens, send a reset signal via bus, digital I/O, or by pressing Reset.
