Examples of using Property class in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Play Contra- for each property class.
All property classes and forgeable materials.
For additional sizes, property classes and surfaces.
Property classes 12 are available on request.
Highest wear class, stability and mechanical property class.
Each property class offers some advantages over others.
Manufactured in a cold extrusion process they correspond to property class 10.9.
From which property class is the term 0.2% yield point(R p0,2) used?
This labelling is mandatory and must contain the steel type, the property class and additionally the manufacturer reference.
For bolts of property class 8.8, a decrease in fatigue life can also be seen.
The labels must be placed on the thread-free part of the stud and contain the stamp of origin,the steel type and the property class.
Nuts with specified property classes-- Coarse thread and fine pitch thread.
It is mandatory for nuts with a thread diameter≥ 5 mm to be labelled with the stamp of origin,the steel type and the property class if this is technically possible.
They can be supplied in property class 10 with thread sizes of M5 to M12 from stock.
You should use bright zinc plated screws andnuts with a strength grade of at least 8.8 or property class 70(ISO 3506) for stainless steel screws and nuts.
In the property classes 14.8 to 16.8 we have been successful in developing a worldwide unique materials concept.
We standardise drives, dimensions, surfaces and property classes to reduce the number of different fasteners.
This shows that even though Lederer is generally regarded as a specialist in the field of fasteners made from stainless steel, not least because of its almost 40 years' experience in that segment, it can also offer both normed and standardized parts and special parts, alsoover the entire field of carbon steel- in all property classes, with all coatings.
Again use screws of property class 10.9 or 12.9 and tighten them with the prescribed torque, as specified in Tab. 5.1.
If the nuts are labelled with grooves(for the materials) and the property class is not indicated, the property class 50 or 025 applies.
The second block denotes the property class, with the numbers indicating 1/10 of the minimum tensile strength of the fasteners in N/mm².
The required tightening moments canalso change if you use screws with a surface or property class other than that specified in Tab. 5.1, as this affects the friction factor.
The designation system for stainless steel types and property classes of screws and nuts is described in the following overview.
It has many advantages, such as lower coefficient of thermal expansion, high hardness,high density and high strength, etc. Properties Class.
Table 1, Copper tungsten grade and silver tungsten electrical contacts of chemical composition andphysical properties Class Cu.
Add property to class.
This is a budget class property for the backpackers.
Identifies a class property for storing the item version number.
You don't have to map every single class property.
