Examples of using Pump head in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
For the pump head, this means.
The pump delivers 1cc of soap, lotion,or fluid per push of the pump head.
Play Pump Head Bam related games and updates.
The design of the pump allows easy dismantling of the valve parts and the pump head does not have to be dismantled.
Removable pump head- easy filling and cleaning.
Manual control of stop/start, direction and priming via membrane keypad Fitted with 205CA 8-roller low pulse pump head.
Nominal head(HN): pump head for which the pump has been designed.
In order to prevent possible damage to the pump, it is advisable to make periodic checks of the power absorption and the pump head.
The pump head is the power output transmitted by the pump to the fluid handled.
At the start we swam with hundreds of pump head snappers, many oriental sweet lips, couple of turtles.
Pump head and motor is imported from Japan, other components are manufactured in Taiwan, the function is steady and useful life is long.
Discontinued: Smartline Pump 1050- Successor: AZURA P 6.1L high precisionbiocompatible HPLC pump with 10 ml pump head, titanium, for max.
To unlock, turn the pump head in the direction of the arrow until it cannot be turned any further about one eighth of a turn, fig.
Depending on the installation type and protection class, these sample gas pumps are available with and without housing orfor the separate installation of the pump head and motor.
You turn the pump head ninety degrees to unlock and use it before turning it back the other way to lock it again.
On an horizontal reinforcement(ex: stoking tank)or on the pump shelf(optional) so that the pump head stays always in vertical position +/-15.
EHEIM Pump head complete with impeller and shaft, but without hose adaptor suitable for the EHEIM external filter professionel 3 250 type 2071.
For CO2 applications, we provide suction-side heat exchangers in the pipeline for cooling the CO2 upstream of the pump inlet anda cooling jacket on each pump head.
EHEIM Pump head complete with impeller and shaft, but without hose adaptor suitable for the EHEIM external filters professionel 3 350(type 2073) and 600 type 2075.
Semi-submersible pumps(in principle, one can easily guess from the name)are immersed in a liquid only half- pump head is lowered into the water, and the engine is mounted on the float.
EHEIM Pump head complete with impeller and shaft suitable for the EHEIM external filters ecco 2231, 2233 and 2232, 2234, 230 V/50 Hz. Original EHEIM spare part no. 1234010.
Purge: connect another tube's extremity for the manual purge(2 mt PVC crystal)in the hose clamp situated on the pump head lower to the right, while the other extremity is to be put into the suction lift tank.
Using the 100 ml pump head, the external air pressure should not exceed 4.2 bar in order not to damage the pump head or pump mechanics.
Super fast tubing load times;No more stretching and jamming silicon tubing through the pump head and defiantly no more fiddling with screws to gain access to the pump head.
EHEIM Pump head complete with USB connector, impeller and shaft, but without hose adaptor suitable for the EHEIM external filter professionel 3e 450 type 2076.
The diaphragm pump with neoprene diaphragm and a pump head made of hostalen is activated as soon as the entered, freely selectable setpoint value is undershot.
The Hastelloy® C pump head shows good resistance to a variety of corrosive media including strong oxidants and hot media, such as sulfuric acid, nitric acid, phosphoric acid, formic acid and acetic acid.
JBL Screws(4x) for the handles left and right at the pump head of the JBL external filter CristalProfi e400, e700, e900 and e1500, also suitable for e401, e701, e901, e1501, e1901 greenline.
Rarely needs cleaning: Immediately below the pump head, there is an innovative combi filter basket II in which the extensive pre-filter media is very easily accessible.
Bywater valve: water automatically enters a water storage tank, then by the flow control valvewill be sent to the diversion of water through the pump head, where it evenly spray water onto the ice surface, like a curtain over the ice flows like the wall surface, the water is cooled to the freezing point, without being evaporated frozen water will flow into the water storage tank through the porous grooves, then restart cycle work.