Examples of using Pump speed in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Pump speed(rpm): 2,200.
Variable mash and wort pump speed.
Pump speed/ circulation: 12L/min.
Display for displaying the pump speed.
Pump speed can be changed from pump or controller.
High vacuum, low power, high pump speed.
Check that the pump speed setting is on the highest speed. .
Remote control for controlling the lighting and pump speed.
Pump speed can be changed from pump from chlorinator early 2012.
The cooling capacity decreases measurably but not dramatically with the pump speed.
The pump speed is adapted to the viscosity of the pumped medium.
PumpDrive continuously matches pump speed to system requirements.
The pump speed is reduced if, for example, the required flow or pres-sure is low.
The whole is connected via SATA cable,the 3-pin connection is only used to read the pump speed.
Precise control over pump speed, run time and quantity of product delivered.
Axis magnetically levitated turbopump with drag stage for a pump speed of up to 2350 l/s for N2.
The pump speed is adjusted according to the volume to be administered and the scheduled infusion time.
In the left range of the windowis the manual selection of the fan rotation, pump speed, LCD brightness.
RGB lighting- Display for displaying the pump speed- Remote control for controlling the lighting and pump speed.
From the front you can see the Enermax logo andbelow the display that will show us the pump speed during operation.
Maximum fuel delivery(1)(2):... mm3/stroke or cycle at a pump speed of:..…min-1 or, alternatively, a characteristic diagram.
It features an engine-mounted lubrication pump to provide constant flow through the system at any pump speed.
Fan and pump speed are synchronized to the output potentiometer and have been optimized to create a superior haze effect when controlled via the detachable remote.
To achieve this precise dosing automatically the pump speed is controlled by a frequency control, that is driven by a pH meter.
Option 2 allows you to adjust the pump speed to 1500 rpm, and in this case fuel consumption is around 6 litres per hour.
There is a maximized difference between forward andreturn temperature which is controlled through the pump speed so the system then offers the best conditions for the optimal operation of the heat generator.
The domestic hot water controller controls the pump speed of the discharge pump so that the hot water temperature is kept constant at the value set even if the withdrawal quantity changes.
A tube of thermal compound,a 9 volt adapter for reducing the pump speed and a multi-language installation manual is also provided by Coolermaster.
The cooling performancedrops only moderately even at 40% pump speed, so that you can calmly control the pump in favor of a quieter operation.
