Examples of using Red rust in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
At least 1200 hours resistance to red rust/.
Resistance to red rust(socket):> 500 hours in swaged state.
The best-known product of corrosion is red rust.
Resistance to red rust(fitting):> 720 hours in unpressed state.
To white rust/ 720 hours resistance to red rust.
Red rust is prevented from forming, and resistance to aggressive acids and caustic solutions is greater due to non-porous protective coatings.
With at least 1200 hours resistance against red rust.
Highest levels of corrosion resistance against red rust, even after handling and assembly.
The corrosion resistance is 480 h against red rust.
The steel panel is tarnished with red rust reminding us of transience, a reason why we hate rust so much in our everyday lives William Anastasi, US.
Corrosion resistance against red rust(swaged)> 500 h.
Test method: RENAULT D17 1686> 10 cycles without red rust.
Molten 1100 C 1300 C 0.13 0.15 oxidized 50 C 0.6 0.7 oxidized andblack 5 C 0.88 Iron With red rust 20 C 0.61 0.85 elektrolytic polished 175 C 225 C 0.05 0.06 Wrought with.
These layers easily reach480 h in the salt spray test against red rust.
I mean, I have got yellow rust, I have got red rust, green rust, brown rust. .
Protecting oxide locking layer covers welds and thereby prevents red rust.
With at least 720 hours resistance against red rust, the Zinc/Nickel coating offers excellent surface protection far beyond the previous market standards- even after transport, handling and assembly.
In combination with the suitable platingthickness of the zinciron coating a high protection against red rust.
Zinc-nickel surfaces typically have layer thicknesses of 5 Âμm to 10 Âμm. These layers easily achieve720 h in the salt spray test against red rust, thereby complying with all current standards in the automotive industry.
Code marking coatings and(B system b) The nominal coating thickness pm Designation chromate treatment c Beginningformation of white rust The beginning of the formation of red rust.
Even after a continuous load of 1,000 hours,in contact with the tested hardware components, no red rust was detected on the screws.
Surpassing the requirements of the corrosion protection class K5 as defined by the VDMA, the German Engineering Association 360 hours resistance towhite rust/ 720 hours resistance to red rust.
Using the additional top coats such as Delta Seal and Delta Protekt VH, which are specially designed for the base coats,the corrosion resistances to white and red rust can be increased.
Bright Rust Red mermaid prom dresses.
Bright Rust Red One-shoulder Sleeveless Natural.
Seductive Bright Rust Red Sleeveless Natural Embroidery.
Cosplay wig with separate plaits rust red.
Cosplay wig with separate plaits rust red.
