Examples of using Red terminal in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Red Terminal Black Terminal 0-17v 32-VA Standard.
Repeat for the Red terminal and lead.
Red terminal(marked R) is for connecting the right channel.
Mount a black terminal for the- speaker connection and a red terminal for.
Connect the red terminal of the compact charger to the chassis, e.
I'm pretty sure you disarm it by removing this wire from the red terminal.
MTH Z-500 Red Terminal Black Terminal 0-18v 50-Watt Electronic.
Hook the other end of the cable to the red terminal on the monitor cabinet.
Connect the red terminals with each other and the black terminals with each other.
Even though it's disarmed if you touch the red terminal we're all barbecue.
The red terminal is the positive pole and the black terminal is the negative pole.
Connect speaker+ to the red terminal of channel A and channel B.
The red terminal is the positive pole and the black terminal is the negative pole.
Connect the positive wire to the red terminal, the other wire to the black terminal. .
When using the terminals, connect each marked core of the speaker cables with a red terminal.
The golden wire connect to red terminal, and the silver wire connect to black terminal. .
Llite to the black terminal on the subwoofer and the black-grey cable(1) to the red terminal on the subwoofer.
Connect the red terminal(fig. 2 3, page 3) of the compact charger to the positive terminal of the battery fig. 2 4, page 3.
Always connect the positive poles of the speakers to the corresponding red terminal and the negative poles to the black terminal of the switch box.
The red terminals on the right side are the“+” terminals, the black ones on the left side the“-” terminals. .
Connect the+ speaker cable to the upper red terminal and then- speaker cable to the lower black terminal. .
The upper red terminal carries the positive phase(red) of the speaker cable, the lower red terminal is the negative phase(black) of the speaker cable.
Train station new york city subway underground track city commute dirty grunge grimy manhattan new york city new yorkcity old platform rail railroad red terminal.
Connect the red terminal of the power supply to the„Standard“ Catenary Mast with Wire(56401) or the connection screw on any„Model“ catenary mast Fig.
Press the terminal tab on the back ofthe speaker and insert the red sleeved wire(+) into the red terminal and the other wire(-) into the black terminal. .
Identify the correct polarity(Red+, Black-) and connect the red terminal of the 3 m extension cable to the positive post of the battery, charge controller or any other 12 Volt device, and the black terminal to the negative post.
A: For replacing battery, please open the top housing, replace a new battery, please note, please connect the cable in CORRECT color,that means Red cable connect to the Red terminal on the battery, Black cable to the Black terminal. .
Ensure that positive cables are connected to the red terminals and the negative cables connected to the black terminals as illustrated in Figure 5b.
For channel pairs operating in bridge operation[switch(7) in position BRIDGE], connect in each case themarked core of the speaker cable to the left, red terminal of the channel pair and the other core to the right, red terminal see imprint BRIDGE at the terminals. .
