Examples of using Skoby in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Sometimes skoby split to a log.
To fixing products carry nails, screws, screws,bolts, skoby.
Steel squares, overlays, skoby also apply.
The Steel for skoby and homutika should have a thickness not less than 5 mm.
The Most expensive variant- skoby from"Mandelli", 134-158.
Skoby should enter into a wall the ends and a cross-section lath a cut.
The lever 7 consists from skoby and the handle welded on it.
A template of Pavlihina for rametki places under loops: 1- an emphasis;2- skoby.
On vertical surfaces have on two skoby on each place of an adjunction of a partition.
The Most widespread kinds gnutja in pipelines- it is taps,ducks, skoby and kalatches fig.
To a template krepjat two skoby with which help it hang aboard a box with a solution.
Connections of elements of such skeleton carry out on nails, bolts,and at bruschatom a skeleton apply and skoby.
Fix in laying seams, and skoby from sheet metal put on a brick laid flatwise.
Skoby and ruffs apply to a fastening of separate designs, and also for keeping of logs on linings during them otesyvanija.
Not bad on the fad specially to arrange skoby for which it is the most easier to hook on bridges.
At first skoby 3 put with the moved apart ends of a plug which serve directing at installation of partitions.
It is possible to attach to a lateral board of a case or a hanger two skoby from a metal strip for storage of umbrellas.
If a corner and skoby are executed from corrosion-proof metal the covering a varnish is not required.
Which consists of a nave 1 with a plate 2 for machine tool fastening on a workbench,a motionless roller 3 with a collar 7 and skoby 4 with a mobile roller 5 and the handle 6.
Usual skoby often split logs, to avoid it allow skoby to Smoljakova with three ends which it is easy to make fig.
After adjustment of position of partitions in the plan and on a vertical the ends vilochnyh skob press and attach to a partition nails 4 in the length 125MM,bending them on an opposite side skoby.
On this party establish running skoby 5- them close up on a laying course through 4… 5 numbers on height in chessboard order so that they have formed a short flight of stairs.
U-shaped loops-releases in diameter 8, working armature in diameter 10… 12, hooks for fastening of elements of facing to working armature in diameter 4… 6 mm,and also probes and skoby for connection of elements of facing among themselves.
Skoby for fastening it is necessary to check up carefully on durability, well to fix them both to the box, and to a balcony or loggia protection irrespective of, whether the box to a protection is suspended or leans against a balcony plate outside.
The machinist of the crane on a signal of assemblers submits the panel to an installation site, and assemblers accept it at height 200… 300MM from rastvornoj beds,develop over an installation site and get an end face in skoby, fixed on a wall.
And- A Having laid over thesecond holder pair of numbers of bricks, in skoby insert porjadovku and fix its wooden wedges 11. to porjadovkam krepjat a cord-prichalku double skoboj 12(a cut-) which is kept on rejke porjadovki by a tension prichalki and as a result friction between skoboj and porjadovkoj.
