Examples of using Teeths in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
A fret saw with small teeths and chisels, flat and semicircular.
Teeths have the form of an isosceles triangle, sharpening slanting.
For pilenija it is more preferable nozhovka or other saw with small teeths.
Teeths are intended for cross-section pilenija which carry out two hands.
Several times a week completely comb it an iron hairbrush with long teeths.
To press teeths wood absolutely unduly, enough one weight nozhovki.
The saw chain represents a set of the separate links(teeths) connected by hinges.
Teeths are recommended to be sharpened for longitudinal or mixed pilenija.
To cut them it is possible nozhovkoj with small teeths, and edges to grind an emery paper.
Teeths with direct sharpening and with step of 2-4 mm, a corner of a point 50-60°.
A file it is better to drive on all teeths in one party, from tooth top from top to bottom.
Teeths pierce a file at an angle of slope 60° height 3MM, width 7,5MM fig.
To a cross-section cutting apply saws with teeths in the form of an isosceles triangle fig.
Metal teeths attached to mouth and with carved out of a wood i do not really know.
One days prior to gluing gear shpatelem with height of teeths 1 mm put mastic on a sheet underside.
At use of wider teeths of a crest receive wide layers of an oak.
One days prior to gluing an underside of sheets ground themastic put gear shpatelem with height of teeths 1 mm.
Preliminary some teeths unbent slightly more of others, it is necessary to level or correct.
He sat back and looked at the face carved into the flat of the blade,a cat-face with bared teeths and a long thin beard.
At teeths of saws for longitudinal pilenija the forward side is called grudkoj, and back- as a back.
Take a metal comb with very dense teeths and gradually, a lock behind a lock, start combing out nits.
Teeths of these saws are arranged so that them it is possible to saw wood up and down.
Also it is worth getting a crest with rather thin teeths or a massage hairbrush which needs to comb a head of hear daily.
Teeths of these saws have direct sharpening and under the form remind a triangle, therefore them it is possible to saw only in one party.
A proleg with thorns saw at an acute angle nozhovkoj with small teeths, and after installation into place stick together and clamp in a clamp.
And if to apply on teeths of a hairbrush of a little santalaceous or rosemary essential oil, it is possible to strengthen effect.
Mostly hidden behind corners they will approach you by seven or eight. They bare their teeths and suddenly stand in front of you barking like hell.
At saws longitudinal pilenija teeths have the oblique-angled form with a small inclination aside pilenija.
At such cloth rather small teeths in height of 4-6 mm have the form of an isosceles or equipotential triangle.
At saws for longitudinal raskroja wood teeths cut with a short cutting edge wood fibres, and lateral divide them among themselves in a direction.
