Examples of using Viewlinc in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Real-time monitoring& alarming with viewLinc.
Can be integrated into the central"viewLinc" monitoring system via WLAN.
NOTE: You do NOT need to uninstall the Digi software from the viewLinc Server.
The account that's running viewLinc was set during installation.
Vaisala viewLinc Monitoring System- Ensuring security, effectiveness and GDP conformity.
To see which loggers are being controlled by viewLinc, see the System tab.
The Vaisala viewLinc software provides continuous, automated monitoring, alarming and reporting.
Enter the Destination IP address/name andport number of the host viewLinc server settings.
See information on installing viewLinc in the Administrator guide or online help.
Digi devices create virtual COMports that allow data loggers to communicate with viewLinc using Ethernet.
Veriteq's central monitoring system viewLinc informs you reliably and fail-safe via PC, e-mail or cell phone should something go wrong.
If the driver has not been installed,perform step 5 on the Digi Setup Page see instructions for viewLinc.
Once accepted in viewLinc, VaiNet data loggers stay synchronized, even in situations where other nearby VaiNet networks overlap.
Installing a Digi device using the Quick Start Guide creates virtual COM ports which are monitored by viewLinc.
You need to ensure that the account that's running viewLinc has write permissions to the folder where you're attempting to transfer the logger files.
If you don't see this, reinstall the Digi by following steps 2 B andC from the Quick Start Guide for viewLinc with Digi Devices.
Optional browser-based viewLinc software provides 24/7 multi-stage alarm notification and remote monitoring for both the VL and SP-series of data recorders.
Digi devices should be configured with static IP addresses,which should be obtained from your IT department prior to installing the Digis and viewLinc.
If the light on the cable is working correctly but you are still getting communication alarms,go into Device Manager on the viewLinc Host computer and ensure the Digi is still installed.
The following page details a variety of high quality transmitters(sensors) with Current Lop/Voltage outputs,which can be used as stand-alone units or adapted to the Vaisala viewLinc monitoring system via the DL4000.
