Examples of using Wire can in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Wire can be cut below grade.
The wire can be delivered in the following surface finishes.
Due to the lack of abrasion resistance the wire cannot be wound off the spool and passed through a wedge tool.
Wire can be multi-directional rotation, more suitable for left and right ears.
Iron wire of GOST 7348-81 is made 3,0 mm, 4,0 mm,5,0 mm and 6,0 mm in diameter, wire can be produced of circular or die-rolled section.
Connection: Wire can welded in PCB directly.
On the other hand, many buildings in BAHNdiffer from this scale,but in any case the wire cannot be shown thinner than the tracks.
A wire can now be continued through terminal strips without changing the wire name.
With the different types we use drawing capstans with diameters between 560 and 1250mm.With a maximum inlet diameter of 40mm wire can be processed e. g. for the production of trolley wire. .
The wire can be tucked under the plastic of the A-pillar and under the head-liner to hide it.
When using non-sagtungsten wire as filament in such bulbs, the wire can have the most effective effects for the cars and motorbikes to achieve stable light from the lamps.
Wire cannot read your messages, and does not share or sell your data or contact details to anyone.
W LED Track Lights is dimmable or non dimmable function are available4 Wire 3 Wire 2 Wire can be option Angle adjustable different beam angle for your option Input Voltage is 180V 240V 12W LED Track Lights with attractive appearance strong metal….
Wire can be labeled the same way any other part can be labeled, but it cannot be recolored.
The multicolored LED wire can be mounted in two different ways, the design is possible inside and outside.
Wire can break off during trimming and become a dangerous missile that can cause serious injury.
Thanks to its resistance to the effects of temperature, the wire can work at sliding linear speed of 60 m/s, superior to those bearable by any other traditional abrasive wire, based on a synthetic matrix of PA 6.12.
The wire cannot scrape the wall and there is no deformation of the hose profile even at extreme bending radii.
For a stuffing the wire can and be not taken but if after all add also it, be especially careful when firing.
The wire can be attached to the integrated wire retainer before before being clipped in order to avoid it popping out.
If the pointer does not turn, the wire can be used to indicate the instrument connected to the sensor line pin, if the pointer rotation, compared with There is an open circuit fault between the sensor and the indicating instrument.
The wire can be dismantled easily without using any tools, just by finger nails, because of the low density characteristics of the jacket.
The wire can be inclined, thus making it possible to make parts with taper or with different profiles at the top and bottom.
The wire can bend in any direction without damaging the wire insulation or conductor, which is ideal for high vibration applications.
The wire can be inclined, thus making it possible to make parts with taper or with different profiles at the top and bottom.
In doing so, each wire can individually vibrate throughout its entire length so that caked up material and jammed particles are more effectively prevented.
Like the wire can be single electric wire UL1007, UL1015, UL1569 or ribbon cable UL2464 type, or multi core cable by UL2464, UL2517, etc.
The wire can be run under the skirting or punch indent in the wall, lay the cable and seal the cement screed(or starting putty) intervention in the integrity of the wall space.