Examples of using Electrical code in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
Electrical Code(NFPA 70).
Other jobs related to oregon electrical code.
Electrical Code Calculator- designed for Electricians.
According to the National Electrical Code, all values should be over 25 megohm.
The electrical service for the Machine is specified by the local electrical code.
Over 40 electrical code& design calculators for working professionals. 1.
In rooms with high humidity the use of voltage above 45V PROHIBITED electrical codes of all countries!
Over 40 electrical code& design calculators for working professionals.
When applicable, install conduit using local and national electrical codes which apply to the application.
National Electrical Code recognizes power strip as Multioutlet Assembly in Article 380.
All wiring must be in accordance with national and local electrical codes, low voltage Class 2 circuit.
In modern electrical codes, this method is not even mentioned, although in practice, he now finds application.
Our photovoltaic modules have UL certification,meaning that they obey the National Electrical Code in the USA.
The GFCI device meets 2014 NEC(National Electrical Code), ETL standard 943 class A GFCI and 498 receptacle.
Electrical code signal is sent down the phone line to activate the microchip inside the individual's body.
In 2011, it was modeled in the US National Electrical Code(NEC) electricity installation regulations.
Local electrical code requirements define the size for the electrical service powering the machine.
This is a rather complex structure, requiring compliance with the engineering,fire and electrical codes, and some design nuances.
This was a legal grounding method under the National Electrical Code for electric ranges and electric clothes dryers from the 1947 to the 1996 edition.
Provides access to the interior of the raceway for wire pulling splicing,(with a limitions as specified in the National Electrical Code), and maintenance, for covers and gasket.
The first National Electrical Code(NEC) was produced by the NBFU in 1897, although it, too, ignored the issue of standardizing wire colors, which wasn't addressed until the 1928 edition of the NEC.
The IP rating has been in use in Europe and other countries outside of North America for many years, andhas just recently been added to the Canadian Electrical Code(for hazardous locations).
The first national electrical code(nec) become produced by means of the nbfu in 1897, even though it, too, left out the issue of standardizing twine hues, which wasn't addressed till the 1928 edition of the nec.
At that point, they're usually competent enough in blueprint reading, mathematics, electrical codes, safety and first-aid to apply for state licenses.
A complete list of equipment requiringground or vanishing, as well as devices, where on the contrary,may be disregarded by these protective measures can be found in the SAE(electrical codes).
The first country wide electrical code(nec) turned into produced via the nbfu in 1897, although it, too, disregarded the problem of standardizing wire colors, which wasn't addressed until the 1928 version of the nec.
Type TFFN(stranded) or TFN(solid) conductors are primarily used as fixture wire as defined by the National Electrical Code(NEC) at temperatures not to exceed 90℃ or not to exceed 60℃ in wet locations or where exposed to oils or coolants.
The first country wide electrical code(nec) became produced via the nbfu in 1897, although it, too, unnoticed the difficulty of standardizing twine colorations, which wasn't addressed till the 1928 version of the nec.
After completion of the physiological adjustment processes, namely Adaptation, Conversion, andSimultaneous Contrast, an electrical code is generated on the retina for every scanning element and transmitted through the nervous system(5) to the brain.
In the United States,the National Electrical Code, requires GFCI devices intended to protect people to interrupt the circuit if the leakage current exceeds a range of 4-6 mA of current(the trip setting is typically 5 mA) within 25 milliseconds.