Examples of using Dpi in English and their translations into Hebrew
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Dpi, coated paper.
The images shouldbe sent with resolution of 200 to 300 dpi.
Dpi, Color, Color Cartr.
Maybe if ada was here, I… Run a dpi compression protocol.
Dpi, Grayscale, Black Cartr.
TA can perform a batch analysis ofat least 100 images at 600 dpi.
Dpi, high resolution paper.
But as we remember, even for the coolest monitors, 2000 dpi was enough.
Dpi, Color, Color Cartr.
For very small(< 1 cm) objects such as seeds,scan at 750 dpi or higher.
Dpi, Color, Black+ Color Cartr.
A maximum resolution of 600 x 600 dpi is possible when printing and HP ImageREt 1200 is used to enhance images.
Dpi, Draft, Grayscale, Black Cartr.
For example, a photo that is 300 dpi and enlarged 200% has an effective resolution of 150 dpi.
Dpi, Color, Black+ Color Cartr.
I am in a print for pay environment and i am needing to know if acrobat 11pro can be used to see what the dpi of a file is.
Dpi, Color, Color Cartr., Plain Paper.
For example, if you are printing at a resolution of 2400 dpi, using a line screen higher than 150 results in fewer than 256 levels of gray.
Dpi, Best, Color, Black+ Color Cartr.
Many dye sublimation printers and devices that print directly onto photographic paperhave an optimal resolution of 300 to 400 dpi.
Dpi, Grayscale, Black Cartr., Plain Paper.
Currently there are models with the following functions: copy, print, fax, internet, encryption of documents,resolutions of 1200 dpi, higher quality color.
Dpi, Draft, Color, Black+ Color Cartr.
When preparing to print an A1 poster size be sure to embed all of the fonts, make sure that your file is sent in aprint ready PDF with CMYK 300 dpi or more.
Dpi, Best, Color, Black+ Color Cartr.
Most PostScript laser printers have a resolution of 600 dpi, while PostScript imagesetters have a resolution of 1200 dpi or higher.
The dpi setting must be the same as the image file so that the size measurements(height, width, perimeter, area) are accurate.
Otherwise, if you have a high-resolution monitor, it will be enough and 2000 dpi, if the display is 1366 x 780, then you can take the manipulator and with an average resolution of 500-600 dpi.
To print at 300 dpi, make sure that the printer has at least 2 MB of available RAM.
The user must set the dpi and measurement units to the appropriate settings by selecting"Scanner DPI" from the"Settings" menu.