Examples of using Ethernet cable in English and their translations into Hebrew
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The ethernet cable still works.
To do this, you will need an Ethernet cable.
Connect an Ethernet cable to the PS3™ system.
Attempt to use another Ethernet cable.
Ethernet cable: Connector is wide and has eight wires.
Make a wired connection using an Ethernet cable.
Obtain an Ethernet cable which is wide and has eight wires.
Connect the PS3™ system to an access point using an Ethernet cable.
Confirm that an Ethernet cable is not connected to the PS3™ system.
Connect to your router using an Ethernet cable or via WiFi.
Use the Ethernet cable to connect your printer to the router.
Make sure your computer is connected via an Ethernet cable and NOT with Wi-Fi.
Use a cross-over Ethernet cable to link the two(laptop and Arduino).
Category 5e(Cat 5): This is, by far, is the most popular Ethernet cable in use today.
Using an Ethernet cable, make a direct connection between the two PS3™ systems.
Without such a router,you need to connect your computer directly to your modem by using an ethernet cable.
Once they were connected through an Ethernet cable, they were later able to access the systems remotely.
The following procedure describes a typicalsetup when connecting to the Internet using an Ethernet cable.
The Network Video Recorders utilize Ethernet cable televisions that can catching as lots of as 2,000 frames per second.
Madaky's door lock is air-gapped,but there is a stand-alone keypad that connects to the interior of the door via Ethernet cable.
When making a wired connection using an Ethernet cable, you can follow the on-screen instructions to automatically select the basic settings.
There will be a data socket(RJ 45)in every office or apartment where users connect an Ethernet cable to any standard device.
So we disconnect the ethernet cable to create an air gap, but again, like merely human hackers routinely transgress air gaps using social engineering.
The setup is very simple: just plug the header pins of the shield into your Arduino,then connect an Ethernet cable to the shield.
However, if you can only connect your computer by using the Ethernet cable, this suggests that there is a problem with the WiFi signal created by your router.
You can now transfer(copy or move) data that is saved in the system storage of one PS3™ system to thesystem storage of another PS3™ system using an Ethernet cable.
Although you can access the router wirelessly,it is better to use an Ethernet cable to directly connect to your router so that you can securely adjust router.
If you like, you can control and monitor the ultrasonic process from your regular web-browser,if you connect the ultrasonic device to your computer via the ethernet cable(included).
If we would like to tinker inside the Terminal,and as mentioned before with a little time do us with ethernet cable, We know that the effort would be worthwhile for the intruder, because“the connection status is connected”, or that shows us the screen….
We can also directly diagnose your State, If it is very slow for our liking and we prefer from train station located a street and a half of the bus, where perhaps there are so kind like this information point,or perhaps let us with the ethernet cable from inside if we have time, because as we will see later officer….