Examples of using Cleaning solution in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
No cleaning solution is required.
Maybe a different temperature or ultrasonic cleaning solution was used.
The cleaning solution should be 5 degrees warmer than the eggs.
In ultrasonic cleaning, it is a must to use an ultrasonic cleaning solution.
Home> Products> Bag Filter> Air cleaning solution dust collector coal dust filter.
Gloves and cleaning solution MUST always be used, followed by paper towels to mop up- all available from the canteen.
To completely remove all contaminants, an ultrasonic cleaning solution has to be used.
The ultrasonic cleaning solution should be changed regularly in industrial cleaning. .
An ultrasonic cleanercan also clean the top of an object if the cleaning solution can get in contact with it.
Most are the right choice of cleaning solution, its temperature, ultrasonic power and duration of treatment.
Slightly squeeze or snap the plastic handle andthe foam head becomes saturated with just the right amount of cleaning solution.
With the help of ultrasonic waves, the cleaning solution can reach all areas of automotive parts.
If an object has blind holes,the holes will be cleaned as long as the ultrasonic cleaning solution can reach them.
Although reusing ultrasonic cleaning solution is fine, the solution has to be checked after every cleaning session.
The foam type of construction is initially cleaned with a vacuum cleaner, and only then it is treated with a cleaning solution.
Can the Hands Be Immersed in the Ultrasonic Cleaning Solution While the Cleaning Process Is Ongoing?
Prepare a cleaning solution of 1-part vinegar and 4 parts of warm water. Apply some of it on the stain and leave it there for a couple of minutes.
And remember, it is best to use an appropriate cleaning solution and cleaning cloth on your high-tech lenses.
Cleaning solution and rubber gloves are available from the canteen, plus paper towels to mop up- solution should be left on 5 minutes before mopping up.
Continuous use of water as the sole cleaning agent,not changing the cleaning solution and using dirty mops can make the marble look pale and unattractive.
To be sure that proper cleaning will happen, spacethe items properly so that all surfaces of all items are accessible to the ultrasonic cleaning solution.
Keep in mind that the cleaning solution can damage any rubber, plastic or wiring that is adjoined in the parts you are cleaning. .
But even thoughthe cleaning process itself is not damaging to items, the cleaning solution, if it is the wrong kind, can damage the items.
Moreover, because this type of cleaning solution is specially made for ultrasonic cleaning, it is the most compatible liquid with ultrasonic cleaners.
Large items should be positioned diagonally in the cleaner'stank to be sure that the flow of the ultrasonic cleaning solution is not hindered by the items.
With the help of ultrasonic waves, ultrasonic cleaning solution acts on all contaminants and removes them from the weapon in the ultrasonic cleaner's tank.
Some of these factors are temperature, level of cleaning that needs to be done,type of ultrasonic cleaning solution, and amount of contaminants on the items.
Aside from increasing the temperature of the ultrasonic cleaning solution, the heater also prevents the temperature from dropping below the required temperature for effective cleaning. .
For those areas where odors can really accumulate,such as bathrooms and kitchens, a cleaning solution may be more effective in removing those really tough odors.
While water and other cleaning solutions can also remove dirt and other contaminants from objects,many contaminants can only be removed by ultrasonic cleaning solution.