Examples of using Control accuracy in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
High control accuracy.
The design of filling structure is reasonable and without hygiene dead angle,the run of equipment is stable, the control accuracy is within±2mm.
Speed Control Accuracy.
Through the positioning of the air velocity controller component, the air volume can be adjusted rapidly,and the air volume control accuracy is plus or minus 5%;
Pressure control accuracy±3bar.
Control Accuracy of Humidity:±2.5% R.H.
Temperature Control Accuracy:±0.3℃.
Control accuracy Temperature, 0.5℃. Pressure, 1.0 Pa.
The PID control, there have advantage temperature control accuracy and small temperature stamping.
Accurate air flow control: through the air flow speed controller component positioning, air volume can be quickly adjusted, air volume control accuracy of± 5%;
Pressure Control Accuracy±0.5Mpa.
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable,it can control the material from the bottleneck, the control accuracy is within±2mm.
Temperature control accuracy of about 5 degrees;
High dimensional control accuracy: the spindle accuracy of the machine tool can reach 0.003mm, the slider fine-tuning is controlled by micrometer, the dimensional control accuracy can reach 0.005mm, and the spindle speed can be within 2000-8000rpm.
Temperature control accuracy of about 5 degrees;
Intelligent arc voltage, control accuracy, manual speed, automatic sensitivity and other adjustable parameters.
High temp controlling accuracy and reliability.
Electro-hydraulic servo system, closed loop control system controls accuracy.
Digital temperature adjustment control enhances accuracy.
It can realize high accuracy control of all kinds of valves.
Servo motor transmission system, accuracy position control.
System control and calibration accuracy: better than +/-1degree.
Accuracy of temperature control±2℃.
The corn flakes machine has the advantageof rational design, high automatic degree and accuracy control.
Extremely accuracy in control and measurement of mixing temperature and ratio.
Intelligent spraying control, high accuracy, wide spray area, minimum spray rejection.
Heater exchanger could control the oil temperature accuracy.
The upgraded inertial control system ensures accuracy of hits up to 1300- 1500 m.
High accuracy of film thickness control system.
But there is one slight problem- we never have control over the accuracy of the system.