Examples of using Dielectric in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
N750 Ceramic Dielectric.
Dielectric strength: Outstanding.
High and low temperature resistance Great dielectric properties.
Test 08 Dielectric Strength.
The 1st shield: Laminated Aluminum tap bonded to dielectric.
People also translate
Dielectric loss angle at 50 Hz.
Interference filters are multilayer dielectric thin film devices.
Low dielectric loss(tngd).
Home About Us Departments/ Units Dielectric Materials Division.
Dielectric: Polypropylene film.
Sweep testing, VSWR rating, and dielectric testing performed in-factory.
Dielectric materials can be solids, liquids, or gases.
CPU/Laptop/GPU/heat conductive cpu applicative dielectric silicone thermal pad.
Dielectric test voltage at ind. Freq. for 1 min 2 Kv.
PI heating film is a thin and translucent material with fantastic dielectric strength.
The dielectric strength of the gas surrounding the electrode is 5× 107 Vm- 1.
RG 405(.086" DIA)semi-flexible or 25 AWG rugged solid dielectric microwave cable termination.
Dielectric constant and dielectric coefficient is the best among whole mineral fiber.
Line impedance determination using dielectric layer thickness, routing copper thickness and trace-width.
The dielectric breakdown of any material is a measure of Peak/√2 and the rms value of the voltage.
Metallic films, colored glasses, and thin dielectric films are used in Honour Optics filters.
The Regional Testing Laboratory, Kolkata was established with the co-operation of WBSEB duringSeptember 2006 to provide service in transformer dielectric evaluation.
A VFD environment poses higher thermal and dielectric stress on motor which severely affects the reliability of the motor.
Sapphire is also an ideal material for semiconductor,electrical and microwave applications because its high dielectric constant and low loss tangent.
Which make this fabric has Non-Stick Surface and high dielectric strength, could resist heat up to 680F, and is chemical-resistant& anti-aging.
But for many future printed applications, a combination of the latest organic semiconductor with higher charge mobility andthe nanostructured gate dielectric will provide a very powerful device technology.”.
Most circuit board dielectric materials can withstand temperatures of 100°C above ambient, although this amount of temperature change would be unacceptable in most situations.
Further technology advances that use even thinner gate dielectrics have an additional leakage component because of current tunnelling through the extremely thin gate dielectric.
Dielectric intensity: Cable terminal box metal components and fiber optic cable core metal is strong, fiber optic cable between the metal accessories, fiber optic cable between metal artifacts and to under the dc voltage of 15 kv, 1 min not breakdown.
The dielectric properties of Aramid, and other fiber ropes, coupled with its electrical transparency has eliminated Inter-modulation interference(IMI) and Electromagnetic interference(EMI), as a result the US Navy and Coast Guard have approved Phillystran rope for mast and antenna stays.