Examples of using Master boot record in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The Master Boot Record.
It may access the Master Boot Record.
Master Boot Record.
Contains the master boot record.
At this moment, our flash drive is formatted exFAT-MBR(Master Boot Record).
The master boot record(MBR).
Re-creates the master boot record.
A Master Boot Record(MBR) is the first sector of a data storage device that has been partitioned.
It hooks the master boot record.
Once the target boot device hasbeen selected the bios will search for the Master Boot Record(MBR).
Damaged master boot record(MBR).
It also boots in a more standardized way,launching EFI executables rather than running code from a drive's master boot record.
Damaged master boot record(MBR).
As the name implies, they attach to the USB thumb drives andDOS boot sector on diskettes or the Master Boot Record on hard disks.
Definition of: master boot record.
Hard Drive: Sectors are 512 bytes long, for compatibility with hard drives,and the first sector can contain a Master Boot Record.
This replaces the master boot record.
It includes the Master Boot Record(MBR), which is accessible during the boot sequence.
Larger drives are now far more common, and a computer with a BIOScan't boot from them due to the way the BIOS's Master Boot Record system works.
This is Master Boot Record partitions.
Sectors are 512 bytes long, for compatibility with hard disk drives,and the first sector can contain a master boot record and a partition table.
Traditionally, a BIOS looked at the MBR(master boot record), a special boot sector at the beginning of a disk.
These two values are often used together as signatures in critical PC system sectors(e.g., the hex word, 0xAA55 which on little-endian systems is 55h followed by AAh,must at the end of a valid Master Boot Record).
This stands for master boot record.
In addition, FAT32 drives usually come with the Master Boot Record partition scheme, which does not work with Apple's CoreStorage routines, and therefore will not allow OS-supported encryption of the drive(among other customizations).
Select the drive or partition you want to install the LILO boot loader to here. Unless you intend to use other boot managers in addition to LILO,this should be the MBR(master boot record) of your boot drive. In this case, you should probably select/ dev/ hda if your boot drive is an IDE drive or/ dev/ sda if your boot drive is SCSI.
When your computer boots- and after the POST finishes-the BIOS looks for a Master Boot Record, or MBR, stored on the boot device and uses it to launch the bootloader.
It also boots in a more standard way,launching EFI executable files instead of running code from the master boot drive record.