Examples of using Working height in English and their translations into Hindi
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Max Working Height.
Aluminum alloy handle to adjust the length of the working height.
Max. Working Height(m).
Single mast self-propelled aerial lift/ man lift with 5m working height.
Max working height(m) 11.7.
Self-propelled dual mast aerial scissor lift/ work table with 9.7m working height.
The working height can be asjusted to customer need.
Self-propelled hydraulic scissor working platform/dual mast work platform with 10m working height.
Meter working height Hydraulic Lift Ladder for outdoor window cleaning.
The inner tube is Ø 48.3 mm(thickness from 2 mm to 4.0mm)with holes to adjust the working height with help of the pin.
M working height self driven dual mast aerialwork platform/ motor driven lift platform.
In the range, they can be adapted to any length, and youare allowed to add or remove sections to suit the required working height.
The maximum ceiling is 2800 meters, and the working height is 500 meters above sea level, the range is 5 km, the maximum speed is 72 km/ h, but during an attack the dive speed reaches 120 km/ h.
The radius of the apparatus is 5 km, the flight duration is 10 minutes, the maximum flight height is 400 meters,and the optimal working height is 150 meters.
Improper stamping: the working height is adjusted too low, the guide column loses oil, the strip is mis-delivered or washed, and the peripheral equipment such as feeding, discharging, receiving machine is damaged, the air tube is not installed or not opened, the punching is abnormal, etc. Damage caused.
ANKA SC270GD is a Single cage Rack and Pinion Lift, Lifting speed 0-40 m/min, Load capacity 2700kg, by frequency convension control system, tower mast section and tie back is hot dip galvanized,maximum working height up to 400m.
When the scissors aerial work platform lifts to the working height, the safety belt is no longer tied to the scissors aerial work platform, should be hung to other structures with reliable hanging point, if there is no reliable hanging point, should be used wire rope Hanging on the steel beam or concrete beam, and the seat belt system linked to the wire rope ring.
ANKA Model SC270GD is a rack and pinion industrial elevator/ Lift, Lifting speed 0-40 m/min, Load capacity 2700kg, by frequency convension control system, tower mast section and tie back is hot dip galvanized,maximum working height up to 400m.
Working at height is often necessary.
Retention clip reducing time working at height.
Always wear safety working belts when working at height.
The height of the working table adjustable;
G platform height aerial working platform with easy loading device for outdoor use.
Safe- can be pre-installed to channel using pre-fitted washer/nut orusing retention clip reducing time working at height.
In the combined models, most often the working surface has a height of 90 cm- this is the optimum height for eating.
Work Table Height Ergonomic.
Working at heights is often required.
This is how altitude sickness works At height, the body fails.
Medical fitness check-up for specific jobs e.g. working at heights.