Examples of using A flat surface in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
Choose a flat surface for the tattoo.
So we're always working on a flat surface.
Brendan, I need a flat surface to write letters for correspondence.
Place the outer needle cap on a flat surface.
And just a flat surface will remain flat, not sagging as it dries.
People also translate
Place the powder vial(green cap) on a flat surface.
This gazebo requires only a flat surface, it does not need a foundation.
Cut: For all cuts as long as gemstone has a flat surface.
Via in pad can provide a flat surface for the component.
The resulting solution was spread on their own, forming a flat surface.
Its facades are not decorated, only a flat surface, preferably with"hidden" handles.
Lead the needle tip into the outer needle cap on a flat surface.
Slightly tap both ends of the filter against a flat surface, so as to get rid of most of the heavy, dry dust.
If little Rotband- add more,until the wall does not take a flat surface.
It is used when you want to lay a flat surface or a pitched roof.
Typically, as the rails are moved along the guide, forming a flat surface.
This kind of mounting system allows you to create a flat surface of the ceiling, on which you can not see the docking points of the rails.
If you properly plastered them and primed, then you get exactly such a flat surface.
After all, with a flat surface timber it requires the same uniform distribution of the insulation that is quite difficult to implement, using tow.
With the help of the level controlarrangement Spila horizontally to the track had a flat surface.
Find a flat surface such as a tabletop and cover an area at least three times the size of the picture frame with towels.
Attaching the film around the perimeter,it is heated and cooled down as it stretches and becomes a flat surface.
Unlike traditional LED lights,these LEDs are no longer on a flat surface side by side but on a long and thin glass tube.
If floors are wooden, the more often theybeams do not differ excellent flatness,and for laying the lag directly to them very difficult to achieve a flat surface.
The only drawback- the inability to achieve a flat surface across the ceiling on large surfaces, so the apartments are not usually set ceilings.
Since these mixtures have a low fluidity, it is ideal to obtain a flat surface is not possible.
In order to start leveling the floor before laying floor covering, you must first verify the existing vertical drop and set the special beacon,indicating a flat surface.
If this work surface is going to be used for writing onpaper as well as computer use a flat surface that is between 28"-30" above the floor(suitable for most adults).
It is recommended that a heapedmeasuring spoon is removed from the bottle and a flat surface e.g. base of a knife is drawn across the top of the measure.
