Examples of using Average thickness in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
Average thickness= 4 cm.
Then put the same pieces of fruit on it- the average thickness.
Scotch average thickness;
The mantle sits underneath the crust andis the thickest layer in the Earth, with an average thickness of 1,800 miles.
Average thickness: 0.3875mm.
By the entered data, you can calculate the average thickness of the film.
Average thickness of about 100 micrometers.
These little helpers have an average thickness of between just one and four millimeters.
Average thickness of metal sheet× density of metal sheet.
For its manufacture you will need an average thickness of the thread and the load to which it is tied.
The average thickness of the ice is 400 m, with a maximum thickness of 1,000 m.
This is Europe's largest glacier,covering 8% of Iceland with an average thickness of 1200 feet.
Their average thickness is about 3 m, and The length is 2.5 km.
The continental ice sheetsare large(several million square kilometers), the average thickness is more than 2000 meters(for instance: Antarctica, Greenland).
Tail of average thickness, for hunting it is desirable to stop it.
The principle of the method is that the weight of 10 m stretch-film is measured andthe calculator on our portal defines the average thickness of 5m2 of stretch-film.
The average thickness of the ice is 10-20 cm, but it has measured as many as 70 cm too.
Since it is necessary that the sheets are reliable, but easily bend, it is worth choosing an average thickness(7- 15 mm)- then you can do without additional heat treatment.
The average thickness of a shingle is 3-4 mm, the width 7-12 cm and the length can be up to 75 cm.
Several layers extend over Canada, portions of South America, Australia,and most of Europe, the average thickness of this Niagara series being about six hundred feet.
The average thickness of a single sheet is 1.5 mm, the total index of several sheets is from 3 mm to 6 mm.
The surface of the electrophoretic coating area is calculated using the formula:(2x total weight of product shell)/(average thickness of metal sheet x density of metal sheet).
You will need: 50 g of average thickness(100m/50g); 1 set of knitting needles for hosiery; 3 1 andrea helpful markers.
The many colored layers of pure clay now used for the manufacture of earthenware werelaid down over the Atlantic coast regions during this age, their average thickness being about 2,000 feet.
The average thickness of this transition stone, the oldest stratified rock layers, is about one and one-half miles.
According to Zoltán Pál's measurement in 1999, the average thickness of the ice layer was over 70 cm, but in many places a one meter thicker layer was found.
However, they will make a good account in the event that you have already decided on the type of mixture, and you know thearea of the intended surface to be treated, as well as the average thickness of the layer(the data needed for calculating the competent).
Km, which is about half of the average thickness round the world, whereas in some places the value of the geothermal gradient can reach the 50 °C/km value, which is about the double of the global average, and consequently the region is an ideal place for the establishment of geothermal power plants.